Limit Stops | Pelco C3412M-D specs

SPECTRA IV

LANGUAGE

<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER REBOOT SYSTEM

EXIT

DOME SETTINGS

<CAMERA>

<MOTION>

<POWER UP>

<LINE SYNC> <PRESETS> <PATTERNS> <ZONES>

<WINDOW BLANKING> <ALARMS>

<AUX>

<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD> <CLOCK> <EVENT>

BACK

EXIT

MOTION

AUTO FLIP PROPORTIONAL PAN PARK TIME (MINUTES)

PARK ACTION SCAN SPEED (DEG/S) PRESET FREEZE FRAME

LIMIT STOPS

<SET MANUAL STOPS> <CLEAR MANUAL STOPS> <SET SCAN STOPS> <CLEAR SCAN STOPS>

<SET AZIMUTH ZERO> <CLEAR AZIMUTH ZERO>

BACK

EXIT

REFERENCE INFORMATION MANUAL LIMITS SET SCAN LIMITS SET

LIMIT STOPS

Limit stops are programmable stops that limit the pan range of the dome. There must be two limits, a left and a right, to define an area.

There are two types of limit stops:

MANUAL: A manual (joystick) pan operation stops when a limit stop is reached.

SCAN: The dome reverses direction during random, frame, or auto scanning when a limit stop is reached.

To set manual or scan stops:

1.Use the joystick to position the cursor beside SET MANUAL STOPS or SET SCAN STOPS.

2.Press Iris Open.

3.Follow the directions displayed on the monitor.

Note: In order for the manual or scan stops to work, the LIMIT STOPS option must be ON.

To clear manual or scan stops:

1.Use the joystick to position the cursor beside CLEAR MANUAL STOPS or CLEAR SCAN STOPS.

2.Press Iris Open.

3.Follow the directions displayed on the monitor.

* This setting applies only to Pressurized Spectra IV dome systems.

C3412M-D (12/08)

53

Image 53

Pelco C3412M-D manual Limit Stops

Contents

Spectra IV and Spectra IV SE Series Page Contents Field Align Wide Dynamic Range Repeat Ack Action Activate Aux Current Reading Reset Alert Welcome Switch Settings InstallationSW2 Switch 1 AD-32 Preset System SW2 Switch 2 CM9502 Setting SW2 Switches 4-5 Serial Port Settings SW2 Switch 3 Control System Compatibility SW2 Switches 6-8 Baud Settings Dome Drive Installation Table A. Switch Settings for SW1 P-Type Control OFF Table B. Switch Settings for SW1 D-Type Control Table B. Switch Settings for SW1 D-Type Control 100 106 141 176 211 246 Getting Started Operation How to Operate Your Dome System Quick Programming Guide Accessing Main Menu Preset CM9500 VCD5000 Endura Workstation 16X LowLight Color Menu Tree Line Sync Presets Dome SettingsEdit the Password Clock Event AUX 18X LowLight Day/Night Menu Tree Alarms AUX Line Sync Presets PatternsEdit the Password Clock Title Text 22X EXview LowLight Color Menu Tree Line Sync Alarms Alarm Settings 23X LowLight Day/Night Menu Tree Edit Detection Areas Patterns 35X LowLight Day/Night Menu Tree Edit Detection Areas Language ACK Alert Reset CameraSpectra Language Exit DIP Switch Information DIP Switch InformationAddress SW2 1 32 PRESETS. OFF System Information Restore Factory Defaults Back Exit Display SetupExit Display Setup Preset Label XXX.XX Title Text Save and Exit Cancel and Exit Help Exit Dome Settings Camera Dome SettingsCamera Type of Lighting Back Exit Camera Advanced Settings Back ExitZoom Limit LOW Light Limit Zoom Speed Applies only to 18X, 23X, and 35X models IR CUT Filter AGC Limit Advanced Camera SettingsShutter Speed Back Exit Auto IrisAuto White Balance Gain B Gain Auto White Balance Auto Sharpness Backlight Compensation BLC Dome Settings ACK Alert Reset CameraVideo Level Auto Iris Level Auto Iris Peak Field Align Sensor Scan Mode Electronic Image Stabilization LOW LUX Noise Reduction Image Enhancement Applies only to 23X and 35X models Wide Dynamic Range Proportional PAN Auto Flip Back Exit Motion Exit Dome Settings Camera Motion Power UPPark Time Scan Speed Preset Freeze Frame Limit Stops Azimuth Zero Back Exit Power UP Power UP Action Power UPPower UP Action Line Sync Back Exit Line Sync Line Sync Phase Model Number of Stored Presets Presets Abcdefghij Cancel Klmnopqrst Uvwxyz Space Back Exit Presets Preset NumberLabel for Preset Preset Number C3412M-D 12/08 Presets Preset Number Preset not Defined Enable Motion DetectionEdit Schedule Clear Preset Clear Camera Settings Back Exit Edit Detection Areas Motion Detection Areas Edit Schedule Activate AUX CommandAUX Time Back Exit Patterns PatternsPatterns Zones Zones Back Exit Window Blanking Window BlankingStyle SET Windows Back Exit Clear Window Enable Window Reverse Clear Window Back ExitReverse Window Blank Tilt Angles Blank ALL ABOVE/BLANK ALL below Alarms C3412M-D 12/08 Default Normally open Dwell Time Secs Edit Schedule Back Exit Back Exit AUX AUX 1 Mode Toggle Dwell Time Secs AUX 2 ModeAUX Edit Title Text Title TextBack Exit Title Text Repeat Alert ACK Action Reset AlertActivate AUX Current Reading Clear Back Exit Edit the Password PasswordBack Exit Password Clock Hour Clock Time Base Internal ClockMonth April DAY END Date Month October DAY END Time MM/DD/YYYY Time Base Internal ClockMonth April Week 1ST DAY Sunday END Date Month October Week Last DAY Sunday END Time Event Back Exit Event Event Type Event Label Event TypeHoliday Back Exit Reference Information Edit Event Label Event Label Edit Event Event Type Preset Number Back ExitBack Exit Event Event Type Event Label Edit Event Label Edit Event Event Label Event Active Event Time Holiday Clear EventList Event Month January DAY Back Exit Edit HolidayEdit Holiday Occurrence List Holidays Clear Holiday Event Number Event Type Label Time Occurs Holiday Scheduled Events Reset Camera Reset, Cycle Power, RebootCycle Camera Power Reboot System Software/Language File Upload Suggested Preventative Maintenance 16X Models Specifications DD4CBW18 18X Models DD4C22 22X Models DD4CBW23 23X Models DD4CBW23-X DD4CBW35 35X Models DD4CBW35-X Page Product Warranty and Return Information