Default Normally open | Pelco C3412M-D manual

SPECTRA IV

LANGUAGE

<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER REBOOT SYSTEM

EXIT

DOME SETTINGS

<CAMERA>

<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>

<WINDOW BLANKING> <ALARMS>

<AUX>

<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD> <CLOCK> <EVENT>

BACK

EXIT

ALARMS

RESUME

SEQUENCE (SECS)

RESET DELAY (SECS)

<ALARM SETTINGS>

BACK

EXIT

ALARM SETTINGS

ALARM NUMBER

ALARM PRIORITY ALARM ACTION ACTIVATE AUX ALARM CONTACT <EDIT SCHEDULE>

BACK

EXIT

5.Set the auxiliary to activate:

a.Use the joystick to position the cursor beside ACTIVATE AUX.

b.Press Iris Open. The cursor moves to the right.

c.Move the joystick up or down to view the following available selections. NO (default): Not activated.

1:An alarm action will close AUX 1.

2:An alarm action will close AUX 2.

d.Press Iris Open to enter selection.

Note: The AUX 1/AUX2 will stop when all the alarms assigned to it have cleared. If the AUX1/AUX is set up as momentary, then it will be activated each time a new alarm is activated.

6.Set the alarm contact:

a.Use the joystick to position the cursor beside ALARM CONTACT.

b.Press Iris Open. The cursor moves to the right.

c.Move the joystick up or down to view the following available selections.

N/O (default): Normally open.

N/C: Normally closed.

d.Press Iris Open to enter selection.

Note: The alarm contact feature is functional and available for 16X and 18X models only if the dome drive is installed in a Spectra III SE or Spectra IV SE back box.

7.To edit the alarm schedule:

The Edit Schedule menu is a duplicate of the Edit Event menu (refer to Event on page 80) with the following exceptions. In the Edit Schedule menu, the event type cannot be changed. Also, the Holiday feature cannot be accessed from the Edit Schedule menu.

For instructions on changing the features in the Edit Schedule menu, refer to Edit Event on page 83.

* This setting applies only to Pressurized Spectra IV dome systems.

70	C3412M-D (12/08)

Image 70

Pelco C3412M-D manual Default Normally open

Contents

Spectra IV and Spectra IV SE Series Page Contents Wide Dynamic Range Field Align Repeat Ack Action Activate Aux Current Reading Reset Alert Welcome SW2 Switch 1 AD-32 Preset System InstallationSwitch Settings SW2 Switch 2 CM9502 Setting SW2 Switch 3 Control System Compatibility SW2 Switches 4-5 Serial Port Settings Dome Drive Installation SW2 Switches 6-8 Baud Settings Table A. Switch Settings for SW1 P-Type Control Table B. Switch Settings for SW1 D-Type Control OFF Table B. Switch Settings for SW1 D-Type Control 100 106 141 176 211 246 Getting Started How to Operate Your Dome System Operation Accessing Main Menu Preset Quick Programming Guide CM9500 Endura Workstation VCD5000 16X LowLight Color Menu Tree Edit the Password Clock Event Dome SettingsLine Sync Presets AUX 18X LowLight Day/Night Menu Tree Edit the Password Clock Line Sync Presets PatternsAlarms AUX Title Text 22X EXview LowLight Color Menu Tree Alarms Alarm Settings Line Sync 23X LowLight Day/Night Menu Tree Edit Detection Areas Patterns 35X LowLight Day/Night Menu Tree Edit Detection Areas Spectra Language ACK Alert Reset CameraLanguage Exit Address SW2 1 32 PRESETS. OFF DIP Switch InformationDIP Switch Information System Information Exit Display Setup Preset Label Display SetupRestore Factory Defaults Back Exit Title Text Save and Exit Cancel and Exit Help XXX.XX Camera Dome SettingsExit Dome Settings Camera Type of Lighting Zoom Limit Advanced Settings Back ExitBack Exit Camera Zoom Speed LOW Light Limit IR CUT Filter Applies only to 18X, 23X, and 35X models Shutter Speed Advanced Camera SettingsAGC Limit Auto White Balance Gain B Gain Auto IrisBack Exit Auto Sharpness Auto White Balance Video Level Dome Settings ACK Alert Reset CameraBacklight Compensation BLC Auto Iris Level Auto Iris Peak Sensor Scan Mode Field Align Electronic Image Stabilization Image Enhancement LOW LUX Noise Reduction Wide Dynamic Range Applies only to 23X and 35X models Auto Flip Proportional PAN Park Time Exit Dome Settings Camera Motion Power UPBack Exit Motion Preset Freeze Frame Scan Speed Limit Stops Azimuth Zero Power UP Action Power UPBack Exit Power UP Power UP Action Back Exit Line Sync Line Sync Phase Line Sync Presets Model Number of Stored Presets Label for Preset Preset Number Back Exit Presets Preset NumberAbcdefghij Cancel Klmnopqrst Uvwxyz Space C3412M-D 12/08 Edit Schedule Clear Preset Clear Camera Settings Back Exit Enable Motion DetectionPresets Preset Number Preset not Defined Edit Detection Areas Motion Detection Areas AUX Time Activate AUX CommandEdit Schedule Patterns Zones PatternsBack Exit Patterns Zones Style Window BlankingBack Exit Window Blanking SET Windows Back Exit Reverse Enable Window Reverse Clear Window Back ExitClear Window Blank ALL ABOVE/BLANK ALL below Window Blank Tilt Angles Alarms C3412M-D 12/08 Default Normally open AUX Back Exit AUX AUX 1 Mode Toggle Dwell Time Secs AUX 2 ModeDwell Time Secs Edit Schedule Back Exit Back Exit Title Text Title TextEdit Title Text Alert Repeat Activate AUX Reset AlertACK Action Current Reading Clear Back Exit Password PasswordBack Exit Edit the Password Clock Month April DAY Clock Time Base Internal ClockHour END Date Month October DAY END Time Month April Week 1ST DAY Sunday Time Base Internal ClockMM/DD/YYYY END Date Month October Week Last DAY Sunday END Time Event Holiday Event TypeBack Exit Event Event Type Event Label Back Exit Reference Information Event Label Edit Event Label Back Exit Event Event Type Event Label Edit Event Label Event Type Preset Number Back ExitEdit Event Edit Event Event Label Event Active Event Time List Event Clear EventHoliday Edit Holiday Occurrence Edit HolidayMonth January DAY Back Exit Clear Holiday List Holidays Scheduled Events Event Number Event Type Label Time Occurs Holiday Cycle Camera Power Reset, Cycle Power, RebootReset Camera Reboot System Software/Language File Upload Suggested Preventative Maintenance Specifications 16X Models 18X Models DD4CBW18 22X Models DD4C22 23X Models DD4CBW23 DD4CBW23-X 35X Models DD4CBW35 DD4CBW35-X Page Product Warranty and Return Information