Pelco C3412M-D manual Back Exit Event Event Type Event Label, Holiday

SPECTRA IV

LANGUAGE

<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER REBOOT SYSTEM

EXIT

DOME SETTINGS

<CAMERA>

<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>

<WINDOW BLANKING> <ALARMS>

<AUX>

<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD> <CLOCK> <EVENT>

BACK

EXIT

EVENT

EVENT TYPE

EVENT LABEL

<EDIT EVENT LABEL> <EDIT EVENT> <CLEAR EVENT> <LIST EVENT>

HOLIDAY

<EDIT HOLIDAY> <CLEAR HOLIDAY> <LIST HOLIDAYS>

BACK

EXIT

REFERENCE INFORMATION

EVENT TYPE

Any of the available event types can be selected from this menu, or you may select ALL EVENTS to manage the events as a group.The following are the settings for event type:

SCAN: A scan event executes a specified scan (random, auto, or frame scan) using the limit stops and scan speed defined in the Motion menu. Refer to Motion Settings on page 50.

PARK: A park event executes the user-defined park action as specified in the Motion menu. Refer to Park Action on page 51.

WINDOW BLANKING: A window blanking event activates or deactivates a previously defined window blank. The window blank remains activated or deactivated until another programmed event changes the state of the window or you modify it through the Window Blanking menu. Refer to Window Blanking on page 65.

AUX: An auxiliary event turns on/off an auxiliary output when the event triggers. Refer to Aux on page 71.

ALARM: An alarm event executes the action associated with the specified alarm number. Refer to Alarms on page 68.

PATTERN: A pattern event starts a previously defined pattern when the event is triggered. Refer to Patterns on page 63.

CAMERA: A camera event assigns the camera settings of a preset to the current camera settings located in the Camera menu. Refer to Camera on page 38. The preset that is referenced by the event must be defined prior to setting up a camera event.

For the camera event to function, the referenced preset must have Custom Camera Settings activated. Refer to Presets on page 57.

Note: If you have camera settings defined in the Camera menu that you wish to restore following a camera event which overwrites those settings, you must save the original settings as a separate preset prior to the camera event being triggered. You can then set a second camera event to call the preset that has the original settings saved. Camera settings can also be changed manually from the Camera menu following the original camera event.

PRESET: A preset event executes a previously defined preset when the event is triggered. Refer to Presets on page 57.

Note: The event type cannot be changed if you are accessing it through the Edit Schedule option from the Preset, Pattern, Window Blanking, Alarm, or Aux menu.

* This setting applies only to Pressurized Spectra IV dome systems.

C3412M-D (12/08) 81