Pelco DX7000 manual Sensor Speed Menu

Models: DX7000

1 60
Download 60 pages 30.31 Kb
Page 19
Image 19

SENSOR SPEED MENU

1

23

Figure 7. Sensor Speed Menu

1SENSOR Button – Select the SENSOR button to open sensor speed menu. Use this menu to set the sensor detection and pre-alarm recording speeds.

2Sensor Recording Speed Slider Bar - Use the slider bar to set the recording rate for sensor detection. If the camera is already set to record continuously, the sensor recording rate can be set to record at a higher speed. The total available fps for all cameras varies per system mode setup (simplex, duplex, or backup).

3Sensor Pre-Alarm Function Slider Bar - You can program the pre-alarm function for sensor recording. When an alarm is triggered, images are recorded for the programmed duration (5 seconds maximum per camera) before the event happened.

C665M-C (5/03)

19

Page 19
Image 19
Pelco DX7000 manual Sensor Speed Menu