Pelco DX7000 manual Presets

PRESETS

A preset is a user-defined camera position using pan and tilt, zoom, and focus commands. The DX7000 Series DVR has programming capacity for 12 preset locations.

NOTE: The selected camera is indicated by the number displayed in the center of the PTZ controls. Refer to Figure 22.

HOW TO MOVE TO A PRESET

a.Click the PTZ button in the DISPLAY Mode. The PTZ Mode appears.

b.Click PRESET.

c.Click the MOVE button.

d.Click a preset button 1-12. The camera moves to the programmed preset position.

NOTE: The remote site software can run only presets and preset tours. Presets can be programmed only with the DX7000 DVR.

44 C665M-C (5/03)