Pelco DX7000 manual HOW to Program a Pattern

PATTERN

A pattern is a user-defined, viewable camera path with a definite beginning and end. The pattern can consist of any standard pan and tilt or lens commands. Once defined the pattern is easily activated with the press of an on-screen menu button. The pattern will run continuously until it is deactivated with another press of the menu button.

HOW TO PROGRAM A PATTERN

a.Click the PTZ button in the DISPLAY Mode. The PTZ Mode appears.

b.Select a camera.

c.Click P-SET and move the camera through a series of movements using the pan and tilt, zoom, and focus commands.

d.To stop programming the pattern, click the P-SET button.

e.To run the pattern, click the P-RUN button. To stop the pattern, click the P-RUN button.

C665M-C (5/03) 43