Pentax 8542, 8572, 8557, 8587 Setting the Blink Detection Function, Setting the Instant Review, 101

• When the camera detects two faces in the same area, the closest LED Macro Light to the blinking light also blinks.

•The camera can tell the positions of up to three detected faces by blinking the LED Macro Lights.

•When the camera detects four or five faces, four or five LED Macro Lights blink depending on the number of detected faces. When the camera detects six or more faces, all the six lights blink (the lights do not tell the positions of detected faces).

•In b(Auto Picture) mode, the LED Macro Lights turn off if the camera selects a mode in which the Face Detection function does not work after pressing the shutter release button halfway.

•When the Self-portrait Assist function is on, the LED Macro Lights do not turn off after the set period of Power Saving.

•The LED Macro Lights do not blink when the detected faces are too small.

Setting the Blink Detection Function

This specifies whether Blink Detection works when you use the Face Detection function. The default setting is O (On).

1 Use the four-way controller (23) to select [Blink Detection] in the [A Rec. Mode] menu.

2 Use the four-way controller (45) to switch between O (On) or

P (Off).

O(On)	The Blink Detection function works.
P (Off)	The Blink Detection function does not work.

The setting is saved.

Blink Detection 1p.64

If the Blink Detection function detected closed eyes when shooting, [Closed eyes have been detected] is displayed for 3 seconds during Instant Review.

Setting the Instant Review

Use this setting to specify whether or not an Instant Review is displayed immediately after images are shot. The default setting is O (On: displays the image).

1 Use the four-way controller (23) to select [Instant Review] in the [A Rec. Mode] menu.

3 TakingPictures

101