Manuals / Pentax / Photography / Digital Camera

Pentax 8542, 8572, 8557 Connecting the Camera to an AV Device, USB/AV terminal Yellow White, 141

Models: 8542 8557 8587 8572

1 253

Download 253 pages 15.19 Kb

Page 143

Connecting the Camera to an AV Device

You can connect the camera to a TV or other device with a video input terminal or HDMl terminal and playback images.

• The power lamp on the camera lights up during a connection.

• If you intend to use the camera continuously for a long period, use of the AC adapter kit K-AC117 (optional) is recommended. (p.37)

•For an AV device with multiple video input terminals, check the operating manual of the AV device, and select the video input terminal to which the camera is connected.

•You cannot output both composite and HDMI video signals at the same time.

•The camera display turns off while the camera is connected to an AV device.

•You cannot adjust the volume on the camera when connected to an AV device. Adjust the volume on the AV device.

•When the camera is connected to an AV device, you can change the images displayed on the screen of the connected AV device with the remote control (optional).

Connecting the Camera to a Video Input Terminal

By using the optional AV cable (I-AVC7), you can capture and play back images on a device with a video input terminal, such as a TV.

External Input
Terminal
VIDEO	AUDIO
	(L)	(R)
USB/AV terminal
Yellow		White

4 PlayingBack

and Deleting Images

141

Image 143

Pentax 8542, 8572, 8557, 8587 Connecting the Camera to an AV Device, Connecting the Camera to a Video Input Terminal, 141

Contents

Ricoh WG-4 GPS Ricoh WG-4 Regarding trademarks Regarding copyrightsTo users of this camera Using Your Camera SafelyRegarding Product Registration About the Camera About the Power Adapter and the AC Adapter Precautions for D-LI92 Battery Usage About the BatteryCare to be Taken During Handling Before Using Your CameraAbout the Battery and Power Adapter Precautions on Carrying and Using Your CameraStoring Your Camera Cleaning Your CameraOther Precautions Contact surface Precautions Before Using the Camera in the WaterRegarding Waterproof, Dustproof, and Shockproof Design Check the Following Before Going Near the WaterBe Careful Near the Water Precautions When Using the Camera in the WaterCamera’s accessories are not waterproof Precautions After Using the Camera in the WaterContents Taking Pictures Taking Pictures with Automatic Exposure AdjustmentUnderwater Shooting Underwater Mode/Underwater Movie Mode Recording Movies 112 125Editing and Printing 144 SettingsSetting the Printing Service Dpof 163 Appendix 204 Connecting to a Computer 191Related operation Indicates precautions to be taken when operating the camera2or Or 4 3orEditing and Printing Connecting to a ComputerComposition of the Operating Manual Playing Back and Deleting ImagesChecking the Contents of the Package Back Names of PartsGetting Started FrontMacro stand Names of Operating PartsGetting Display Indications Display in a Mode250 World Time setting p.172F3.5 GettingStarted GPS latitude GPS status GPS longitude When the lens points to the northWhen the lens points to the east Info Display in Q ModeEye-Fi communication status p.181 Normal Display/ Info 1 in Playback ModeA10 Four-way controller Menu 3 button Guide Display180 04/04/14 06 25 35 45 700hPaDark image Correct image Bright image Histogram←Brightness→ Bright Understanding BrightnessElectronic Level Sub-display Indicator Ricoh WG-4 GPS Only Attaching the Carabiner Strap Protective rubber ringStarted Powering the CameraInstalling the Battery Battery cover lock Release latchGettingStarted Charging the Battery Approx min Image Storage Capacity*1Playback Time Camera will turn off after this message appears DC terminal DC coupler Using the AC AdapterStarted Insert the DC couplerGettingStarted Backing Up Data Installing an SD Memory CardBattery cover SD Memory SD Memory Card Card socket Checking the SD Memory Card Press the power buttonPress the power button again Turning the Camera On and OffPlaying Back Still Pictures 1p.125 Starting-up in Playback ModePress and hold down the Q button Four-way controller Button 3 button Initial SettingsSetting the Display Language Press the 4 buttonStarted Use the four-way controller 45 to choose a city Press the four-way controllerPress the 3 button  When the Wrong Language Has Been Inadvertently Selected When the Screen After Appears in the Wrong Language Set the current date and time and the display format Setting the Date and TimeUse the four-way controller 23 to change the month GettingStarted Mode Understanding the Button FunctionsGreen button Four-way controllerY button Switches to a mode p.52Green/i button Displaying data stored in the built-in memory Switching Between a Mode and Q ModeCamera switches to Q mode Camera switches to a modeOperating the Menus Setting the Camera FunctionsPlayback mode Exits the menu and returns to the original screen Menu ExitCorrection Rec. Mode MenuMenu List 123 Tone AdjustmentDescription MemoryOperations  a Rec. Mode MenuCommon  C Movie Menu Setting MenuMovie Menu When playing back images Eye-Fi For setting whether or not to use Eye-FiPower Saving Saving mode W Setting Menu 5 *RICOH WG-4 GPS only  W Setting MenuFocus frame Face detection frame Taking PicturesCheck the subject and shooting information on the display Press the shutter release button fully Taking Pictures Press the shutter release button halfwayPress fully Using the Shutter Release ButtonPoor focusing conditions Press halfwayZoom ratio Using the ZoomPress the W/T button in a mode Instant Review and Blink DetectionRecorded pixels and the maximum zoom ratio Zoom in with high image qualityUse the four-way controller Press the 3 button in a modeTo switch between O On or P To Set the Digital ZoomCapture Mode Palette appears Setting the Shooting ModePress the four-way controller 3 in a mode Use the four-way controller 2345 to choose a shooting modeSunset Captures images with the settings saved as E p.73Underwater Movie Use this mode for taking underwater movies Auto PictureSaves them as a movie Description FlowerSoftened TimePictures Using the Face Detection FunctionSwitching the Face Detection Function 1p.99 Press the shutter release button fully Taking Pictures in Basic Mode Green ModePress the Green button in a mode \Press the shutter release button halfway250 F3.5 Press the four-way controller 2 to select Save Using E ModeTo Save the Settings in E Mode Set the shooting mode to e or b. p.67Take a picture To Take Pictures in E Mode Use the four-way controllerTo select E from Capture Mode Palette Mode is selected and the camera returns to capture mode Taking Pictures of Your Pet Pet ModeTaking Pictures in Digital Microscope Mode E mode is selected and the camera returns to capture modeSet the number of shots Press the 4 button while the current settings are displayedTaking Pictures at a Set Interval Interval Shot Set the intervalPress the four-way controller 2 in a mode Using the Self-timerSet the start delay If you select Z If you select gCamera is ready for taking pictures continuously ContinuousRemote control unit is pressed Taking Pictures Using a Remote Control Unit OptionalTaking Press the four-way controller 2 in a mode Button on the remote control unit is pressedPress the four-way controller 2 in a mode Using the Rec. Mode Menu Items Setting the Shooting FunctionsPress the four-way controller 4 in a mode Selecting the Flash ModeAbout the red-eye phenomenon Selecting the Focus ModeFocus Mode screen appears Press the four-way controller 5 in a mode\ indicator Saving the Focus Mode setting 1p.123Press the four-way controller 5. a pull-down menu appears Use the four-way controller 23 to select Focusing AreaYou can change the autofocus area Focusing Area Changing the Autofocus AreaAF Setting screen appears Setting the Auto MacroSetting the = Assist Light Focus Assist Pull-down menu appears Setting the Image ToneSelecting the Number of Recorded Pixels Use the four-way controller 23 to change the quality level Selecting the Quality Level of Still PicturesQuality Level White Balance screen appears Adjusting the White BalanceUse the four-way controller 23 to change the setting Or electric lights other than fluorescentHave a blank sheet of white paper or similar material ready Manual SettingWhite balance is automatically adjusted Selecting the Fluorescent Light TypeMetering Brightness and determines the exposure Center Setting the AE MeteringWeighted By noise Setting the SensitivityDefault value sensitivity Sensitivity is automatically set by the cameraYou can adjust the overall brightness of the picture Setting Auto ISO RangeSetting the Exposure EV Compensation To select Highlight Correction or Correcting the Brightness D-Range SettingUse the four-way controller 23 to select D-Range Setting A Rec. Mode menu Press the four-way controllerDoubled Setting the Shake ReductionDisplay When Highlight Correction is set To Auto or On TakingPictures Persons face. The camera automatically release Switching the Face Detection FunctionSubject smiles Self-portrait Assist +100 To Use the Self-portrait Assist Function101 Setting the Blink Detection FunctionSetting the Instant Review Setting is saved Blink Detection 1p.64102 Setting the Green Button FunctionTo select a function you want to Assign103 To select Fn Setting104 TakingChanging Assigned Items Pictures105 Setting the Image Sharpness SharpnessSetting the Saturation/Tone Adjustment You can give an image sharp or soft outlines106 Setting the Image Contrast ContrastSetting the Date Imprint Function For setting the image contrast levelIQ Enhancer function works Setting the IQ Enhancer ProcessingSetting the Macro Light 107108 Setting the Electronic LevelUsing a Conversion Lens 109 110 Underwater Shooting Underwater Mode/ Underwater Movie ModeUnderwater Shooting 111 112 Recording MoviesRecording Movies Still picture capture with the 4 button is not available Saving a still picture during movie recording113 Press the Movie button again Recording a Movie Quickly Using the Movie ButtonKeeping the Shutter Release Button Pressed Press the Movie buttonRecorded pixels and frame rate Use the four-way controller 23 to select Recorded PixelsC Movie menu Press the four-way controller To change the number116 Setting the Movie SR Movie Shake Reduction FunctionTo select O On or P Off 117 Constantly Adjusting Focus While Recording MoviesSetting the Optical Zoom Off Optical zoom is not Available Setting is saved118 To set the interval, then press ButtonFrame returns to Total Time Frame moves to Start DelaySet the total time 119120 Using the Time-Lapse Movie FunctionPress the shutter release button fully again You can capture frames for fast motion playback121 Using the High Speed Movie FunctionCamera records a high speed movie for slow motion playback 122 Using the 1cm-Macro Movie FunctionUse the four-way controller 2345 to select 1cm-Macro 123 Saving the Settings Memory124 Button Four-way controller Button i button Playing Back Still PicturesPress the Qbutton after taking a picture To Delete the Displayed Image126 Playing Back a MovieDeleting Images Following operations can be performed during playback127 Press the f button in Q modeMulti-Image Display Image Display/12-Image DisplayBack and Deleting Images Playing Press the f button twice in Q modeFolder Display/Calendar Display Press the f buttonCalendar display Using the Playback FunctionsQ mode, press the four-way controller Use the four-way controller 2345 to choose an iconSelected playback function ImagesBack and Deleting 130131 Playback Mode PaletteSlideshow 133 Use the four-way controller 23 to select Screen EffectImage appears on the display Rotating the ImagePress the Q button after taking a picture 134135 Zoom PlaybackYou can magnify an image up to ten times Deleting Images Press the 4 button Deleting ImagesDeleting a Single Image PlayingBack Use the four-way controller 2 to select Delete137 Press the f button once or twice in Q modeDeleting Selected Images Back and Deleting Images Press the four-way controller Press the 3 button in Q modeDeleting All Images Use the four-way controller 23 to select Delete All139 Protecting Images from Deletion ProtectUse the four-way controller 2 to Select Protect140 141 Connecting the Camera to an AV DeviceConnecting the Camera to a Video Input Terminal USB/AV terminal Yellow White142 Turn the AV device onTurn the camera on 143 Connecting the Camera to an Hdmi TerminalSelect Recorded Pixels Quality Level Editing ImagesChanging the Image Size Resize Printing145 Cropping ImagesChoose the cropping area Editing and Printing Press the 4 buttonApprox % Processing Images to Make Faces Look Smaller146 Green frame indicates the face that is to be processed147 Using the Digital Filters148 You can edit the image to look like an ink rubbing Using the HDR FilterUsing the Ink Rubbing Filter Filter from the Playback Mode Palette Press the 4 button150 Creating a Collage ImageUse the four-way controller 45 to choose the effect You can choose from 3 patterns of layout Use the four-way controller To choose the recorded pixels151 Item selection screen appearsRepeat to lay out the rest images Use the four-way controller 23 to choose the backgroundLaying Out the Images Editing and Printing To choose the image to be placed Press the 4 buttonConfirmation dialog for saving the image appears Red-eye EditPress the 9 button 153154 Overlaying Your Original Frame on Still PicturesFrame Text Stamp155 Printing Set up the text stampFrame setting screen appears For details, refer to To Set Up Text Stamp p.157156 To Adjust the Position of the Frame and ImagePress the Green button Printing Press the Green button157 To select Display Position Press the four-way controller158 Editing MoviesTo View the Preview Screen Press the Green button To Save a Frame from a Movie as a Still PicturePosition To choose the frameYou want to save To specify the dividingOnly images available for the title picture are displayed To Add a Title Picture to a Movie160 Screen for selecting a title picture appearsCopying method selection screen appears Copying ImagesUse the four-way controller 2 to select 161162 Use the four-way controller 23 to select Press the 4 buttonTo select the image you want to CopySet the following items for each image Printing SettingsSetting the Printing Service Dpof Printing a Single ImageOOn The date will be imprinted Use the four-way controller 23 to select Single Image164 165 Message Applies Dpof settings to all images appearsPrinting All Images Select All Images in on p.164 Press the 4 button166 Camera SettingsUsing the Setting Menu Items Menu CancelFormat screen appears Formatting the MemoryUse the four-way controller 2 to Select Format 167Sound screen appears Changing the Sound SettingsUse the four-way controller 23 to select the sound type 168169 Use the four-way controller 23 to select Date AdjustmentW Setting menu Press the four-way controller Changing the Date and Time170 Setting the AlarmAlarm screen appears Change the time in the same way as in steps 7 to171 Use the four-way controller 23 to select the alarmPress the 4 button Press the four-way controller World Time screen appears Setting the World TimeTurning the Alarm Off 172Select O if the Destination city uses daylight saving time Setting is saved When X Destination is selectedDisplayed in a mode 173174 Setting the Text Size on the MenuChanging the Display Language Use the four-way controller 23 to select the text size100 Changing the Naming System of the Folder175 XxxRICOH xxx is the 3-digit folder numberRepeat and enter the remaining characters Naming the Folder YourselfSelect User in in Selecting the Rule for Naming Folders Press the four-way controller177 Changing the Naming System of the FilePress the 4 button twice You can change the naming system of the file178 Naming the File YourselfWhile a is selected, or press While is selected179 Changing the Video Output Format180 Selecting the Hdmi Output FormatUse the four-way controller 23 to select an output format Use the four-way controller 23 to select Eye-Fi Setting the Eye-Fi CommunicationAdjusting the Brightness of the Display Setting menuChoose from 2min., 1min., 30sec., 15sec., 5sec. or Off Using the Power Saving FunctionUsing the Auto Power Off Function 182183 Setting the Quick Zoom FunctionSetting the Guide Display Pixel Mapping screen appears Perform Pixel MappingSelect Pixel Mapping.Checks the image sensor 184185 Changing the Start-up ScreenTo choose the image for the start Up screen 186 Resetting to Default Settings ResetSetting the Startup Shortcut Use the four-way controller 2 to select ResetPress and hold down the 4 button Use the four-way controller 45 to switch between O On OffDisplaying the Clock Display Use the four-way controller 23 to select an item188 Light up the LED Macro LightsAutomatically Rotating Images during Playing Back Press and hold down the Green buttonOff Displays current time only Using the Pressure Sensor189 Pressure Sensor screen appearsPress the four-way controller Use the four-way controller Specifying the Location where You Use the CameraTo change the setting Use the four-way controller 23 to select Camera LocationComputer Connecting to a ComputerSetting the USB Connection Mode MSC and PTP192 Connecting the Camera and a ComputerConnecting to a Computer Turn your camera on Message appears Disconnecting the Camera from the ComputerDisconnect the USB cable from the Macintosh and your camera 193Following software is included on the provided CD-ROM Using the Provided SoftwareSystem Requirements Windows195 Installing the Software196 Click Exit on the installation screenSelect the file format to use and click Next Click FinishWindow is closed Click MediaImpression 2.2 LEClick Close 197Click Import media files to local disk Using MediaImpression on WindowsComputer Product Registration on the Internet Connect the camera to your Windows PC199 When the AutoPlay screen does not appearSelect an image to transfer Click ImportImport screen appears Using MediaImpression on Macintosh200 MediaImpression 2.2 LE starts and the start page appears201 202 Transferring Images Using an Eye-Fi CardCard is to be used 203204 Mode\ K 205206 207 208 Messages209 Message210 TroubleshootingProblem Cause Remedy Or set the focus manually 211Lock the focus on an object Same distance away as the subjectReset Setting Default Settings a Rec. Mode Menu Items Last Memory SettingRecorded Pixels Yes 115  C Movie Menu Items213 Off Yes File No Green Button214  W Setting Menu Items215  Playback Mode Palette Items216 217  Button/Key Operation218 List of World Time Cities219 Main Specifications220 221 222 Ricoh WG-4 223GPS Function on the Ricoh WG-4 Utilities Guide for GPS Before Using the GPSAbout the GPS Precautions for Using the GPS CE Mark is a Directive conformity mark of the European Union Pull-down menu appears Using the GPSPreparation for Using the GPS Function GPS screen appearsGPS information is being received. GPS On/Off is set to On, Recording GPS Information on Captured ImagesDisplaying the GPS Information Recorded on Captured Image Camera enters Q mode and an image appears on the displayRecording a Log at a Set Interval and Duration Recording and Saving a LogRecord log Starts log recording Logging Interval Saving the Recorded Log Stopping Recording a LogPress the 4 button Confirmation screen appears Discarding the Recorded LogUse the four-way controller 23 to select Discard Deleting Logs Turn the camera onPress the four-way controller 5. The GPS screen appears Setting of World Time is displayedCorrecting Time Automatically Complete appears when the camera is successfully calibrated Adjusting the Electronic Compass CalibrationAppendix 239 Warranty PolicyProcedure During 12-month Warranty Period 240 241 For customers in USAFor customers in Canada Pour les utilisateurs au Canada242 Class B Personal Computers and Peripherals243 244 Index245 246 247 Video output formatMemo Memo Memo Road, Xu Hui District, Shanghai, 200032, China Am Kaiserkai 1, 20457 Hamburg, GermanySL3 8PN, U.K Argentia Road Mississauga, Ontario L5N 3S7