Pentax 8542, 8572 Changing the Start-up Screen, To choose the image for the start Up screen, 185

Changing the Start-up Screen

You can choose the start-up screen displayed when the camera is turned on. You can choose any of the following images as the start-up screen:

•Guide display start-up screen showing a guide for the shooting modes and buttons

•Pre-installed screen

•One of the captured images (compatible images only)

1Use the four-way controller (2345) to select (Start-up Screen) from the Playback Mode Palette.

2Press the 4 button.

The image selection screen appears.

3
	Use the four-way controller (45)
			100-0017
	to choose the image for the start-
	up screen.
	Only images available for the start-up
	screen are displayed. You can also choose
	the pre-installed screen or guide display	MENU Cancel	OK OK
	start-up screen already stored in the

camera.

4 Press the 4 button.

The setting is saved.

• Once the start-up screen has been set, it will not be deleted even if the original image is deleted or the SD Memory Card or built-in memory is formatted. However the image is deleted if you change the start-up screen after deleting the recorded image or formatting the memory.

•The start-up screen is not displayed when set to [Off].

•The start-up screen is not displayed when you turn the camera on in playback mode.

•Movies cannot be used for the start-up screen.

6 Settings

185