Pentax 8557, 8572, 8587, 8542 specifications Record log Starts log recording Logging Interval

Use the four-way controller (23) to select [Logging Duration], and press the four-way controller (5).

7 Use the four-way controller (23) to select the logging interval, and press the 4 button.

Record log

Starts log recording

Start	15sec.
Logging Interval	30sec.
Logging Duration	1min.
MENU Cancel	OK OK

8

9 Use the four-way controller (23) to select the logging duration, and press the 4 button.

Record log

Starts log recording

Start
Logging Interval	15sec.
Logging Duration	1hr.
MENU Cancel	OK OK

10 Use the four-way controller (23) to select [Start], and press the 4 button.

Record log

Starts log recording

	Start
Logging Interval		15sec.
Logging Duration		1hr.
MENU			OK OK

•After recording a log, the camera cannot record a new log until the existing log is saved to the SD Memory Card as a log file (p.232) or discarded (p.234).

•[Record log] can be set only when [GPS On/Off] is set to [On].

•When the battery level indicator is (red), the camera does not record a log.

• (Interval Shot) and (Interval Movie) cannot be selected from the Capture Mode Palette while recording a log.

8 Appendix

This part applies only to the RICOH WG-4 GPS camera 231