Pentax 8557, 8572, 8587, 8542 specifications Saving the Settings Memory, 123

Saving the Settings (Memory)

The Memory function is for saving the current camera settings when the camera is turned off.

For some camera settings, the Memory function is always set to O (On) (the settings are saved when the camera is turned off), while for others you can choose O or P (Off) (to choose whether the settings are saved or not when the camera is turned off). The items which can be set to O or Pin the Memory function are shown in the table below. (Items not listed here are always saved in the selected settings when the camera is turned off.)

If you select O, the settings will be saved in the status they were in immediately before the camera was turned off. If you select P, the settings will be reset to the defaults when the camera is turned off. The table below also shows whether the Memory default setting for each item is O or P.

Item	Description	Default	Page
		setting
Face Detection	The [Face Detection] setting in the [ARec.	P	p.99
	Mode] menu
Flash Mode	The flash mode set with the four-way	O	p.83
	controller (4)
Drive Mode	The drive mode set with the four-way	P	p.77 -
	controller (2)		p.81
Focus Mode	The focus mode set with the four-way	P	p.84
	controller (5)
Zoom Position	The zoom position set with the W/T button.	P	p.64
MF Position	The manual focus position set with the four-	P	p.85
	way controller (23)
White Balance	The [White Balance] setting in the	P	p.91
	[A Rec. Mode] menu
Sensitivity	The [Sensitivity] setting in the	P	p.94
	[A Rec. Mode] menu
EV Compensation	The [EV Compensation] setting in the	P	p.95
	[A Rec. Mode] menu
AE Metering	The [AE Metering] setting in the	P	p.93
	[A Rec. Mode] menu
Digital Zoom	The [Digital Zoom] setting in the	O	p.66
	[A Rec. Mode] menu
DISPLAY	The information display mode set with the	P	p.21
	4 button
	If a new SD Memory Card is inserted when		⎯
File No.	set to O (On), file numbers are assigned	O
	sequentially.

3 TakingPictures

123