Pentax 8572, 8557, 8587, 8542 specifications Transferring Images Using an Eye-Fi Card, 202

7 Connectingto

a Computer

Transferring Images Using an Eye-Fi Card

You can transfer images to your computer or similar devices automatically when a built-in wireless LAN memory card (Eye-Fi card) is inserted in the camera.

1 Specify the wireless LAN access point and transfer destination on the Eye-Fi card.

For details on how to set up the card, refer to the operating manual supplied with the Eye-Fi card.

2 Turn the camera off.

3 Insert the Eye-Fi card into the camera.

4 Turn the camera on.

5 Select O (On) for [Eye-Fi] in the [W Setting] menu.

The images are transferred automatically. For details on how to set up the camera, refer to “Setting the Eye-Fi Communication” (p.181).

One of the following icons will appear on the display.

Communicating

When [Eye-Fi] is set to O and the camera is connected to an access point or is searching for an access point

Waiting for communication

When [Eye-Fi] is set to O and is not connected to an access point

Eye-Fi communication is not allowed

When [Eye-Fi] is set to P (Off)

Version error

When the version of the Eye-Fi card is out of date or the card is write-protected

• Endless Memory Mode is not supported.

• Update the Eye-Fi card firmware as necessary before using the card.

202