Pentax 8557, 8572, 8587, 8542 specifications Image Storage Capacity*1, Playback Time, Approx min

• Do not charge batteries other than the rechargeable lithium-ion battery D- LI92 using the supplied power adapter (D-PA135). Doing otherwise may cause damage or overheating.

•The battery has reached the end of its service life when it starts to run down soon after being charged. Replace it with a new battery.

•If the camera is connected to the power outlet but the charging indicator fails to light, the battery may be faulty. Replace it with a new battery.

•When charging the battery, you cannot set the camera upright on the table because the USB cable comes out of the bottom of the camera.

•Do not use excessive force when sliding the battery cover open and closed because the waterproof seal may peel off. If the seal is not in the correct position, the camera will not be waterproof.

•The time required to fully charge the battery is about 180 minutes (max.).

(The charging time may vary depending on the ambient temperature and charging conditions.) The appropriate ambient temperature for charging the battery is 0°C to 40°C (32°F to 104°F).

•You cannot turn on the camera while it is charging.

•Image Storage Capacity, Movie Recording Time, and Playback Time (at 23°C (73.4°F) with the display on and the battery fully charged)

Image Storage Capacity*1	Movie Recording Time	*2	*2
(flash used for 50% of shots)			Playback Time
Approx. 240 pictures	Approx. 65 min.		Approx. 200 min.

*1 The image storage capacity shows the approximate number of shots recorded during CIPA-compliant testing (at 23°C (73.4°F) with display on and flash used for 50% of the shots). Actual performance may vary according to operating conditions.

*2 According to the results of in-house testing.

• Battery performance may deteriorate as temperature decreases. When using the camera in cold regions, we recommend carrying a spare battery in your pocket to keep it warm. Battery performance will recover when the temperature returns to normal.

•If [GPS On/Off] of the [GPS] settings is set to [On], the camera performs GPS positioning regularly even while the camera power is off, which reduces the battery life.

•Using the camera's pressure sensor to determine the current air pressure and height reduces the battery's life.

•Be sure to take a spare battery with you when traveling abroad or to a cold region, or if you intend to take a lot of pictures.

1 GettingStarted

35