Pentax 8557, 8572, 8587, 8542 specifications 203, Card is to be used

•When you intend to use a brand-new Eye-Fi card for the first time, copy the Eye-Fi Manager installation file to your computer before formatting the card.

•Images are transferred via a wireless LAN. Set [Eye-Fi] to P(Off), or do not use an Eye-Fi card in locations where the use of wireless LAN devices is restricted or prohibited, such as on airplanes.

•If you insert an older version of Eye-Fi card in the camera, an error message appears.

•Images will not be transferred in the following situations:

-When available wireless LAN access points cannot be found

-When the battery level is low ( (yellow) or (red) is indicated)

•Transferring a large number of images may take a while. Use of the optional AC adapter kit (K-AC117) is recommended.

•Auto Power Off does not function while transferring images.

•The camera may be turned off automatically to protect the internal components when the inside of the camera reaches a high temperature caused by transferring a large file such as a movie.

•Use of a wireless access point, Internet and suitable Internet settings are required to transfer images via a wireless LAN. For more information, refer to the website (http://www.eye.fi/).

•For details on how to use an Eye-Fi card, refer to the operating manual supplied with the card.

•In case of malfunction of an Eye-Fi card, refer to the manufacturer of the card.

•The camera has the function of turning on or off the wireless communication of an Eye-Fi card. Please note, however, that not all Eye- Fi card functions are guaranteed to operate.

•Use of an Eye-Fi card is permitted only in the country where the Eye-Fi card

is purchased. Observe local and national regulations of the country where	7
the card is to be used.
	Connecting to a Computer

203