Pentax 8587 Using the Zoom, Instant Review and Blink Detection, Press the W/T button in a mode

3 TakingPictures

Instant Review and Blink Detection

The image appears on the display temporarily (Instant Review) immediately after it is captured. If the camera detects that the subject’s eyes are closed while Face Detection (p.99) is activated, the message [Closed eyes have been detected] appears for 3 seconds (Blink Detection).

• When the Face Detection function does not work, Blink Detection also does not function. Even if the subjects’ faces are recognized, Blink Detection may not function depending on the condition of the recognized faces.

• You can also disable the Blink Detection function (p.101).

Using the Zoom

You can use the zoom to change the captured area.

		W/T button
		Four-way controller
		4 button
		3 button
1	Press the W/T button in A mode.	Zoom ratio
	W Wide (left)	Zoom bar
	Widens the area that is captured by the
	camera.	28.8
	T Tele (right)
	Enlarges the subject.
	If you continue to press T, the camera
	automatically switches from optical zoom to
	Intelligent Zoom and stops at the point where	38
	the zoom switches to digital zoom.
	Once the button is released and pressed again, the camera switches to digital
	zoom.
	If the digital zoom is set to off in the menu, the optical zoom and the Intelligent
	Zoom ranges are available for use. The zoom ratio of the Intelligent Zoom varies
	depending on the number of recorded pixels.

64