Pentax 8542, 8572, 8557, 8587 Displaying the GPS Information Recorded on Captured Image

Displaying the GPS Information Recorded on Captured Image

1 Press the Q button after shooting still pictures or movies.

The camera enters Q mode and an image appears on the display.

2 Press the 4 button until the Info 2 display appears.

If GPS information cannot be obtained, “--” appears on the display. *The date and time information is displayed in GPS time (the reference time scale of the GPS system). This may be different from the time you have set on the camera.

	100-0038
		3200m
		700hPa
		180
	04 / 04/'14 06: 25: 00
	N 35	45' 52"
Edit	W139	41' 29"
GPS time	GPS latitude and
	longitude

The image on which the GPS information is recorded can be imported to a computer using the supplied software “MediaImpression 3.6.2 LE” (for Windows) and the location where the image was taken can be displayed on the map.

Select an image in the preview screen and click (location) in the [Property] area to display the map.

*To display the map, you need to connect your computer to the Internet.

8 Appendix

This part applies only to the RICOH WG-4 GPS camera 229