Pentax 8542 Setting the Shake Reduction, Display When Highlight Correction is set To Auto or On

6
	Press the 4 button.
			P
	The setting is saved.
	The D-Range Setting icon appears on the
	display.
	P	When [Highlight Correction] is set
		to [Auto] or [On]	38
	Q	When [Shadow Correction] is set to
		[Auto] or [On]

When both [Highlight Correction]

Oand [Shadow Correction] are set to [Auto] or [On]

•When [Highlight Correction] is set to [On], the minimum sensitivity value is

doubled.

•If you change the [Highlight Correction] or [Shadow Correction] setting frequently, you can save time by assigning it to the Green button (p.102).

The D-Range setting cannot be set in some shooting modes. Refer to “Functions Available for Each Shooting Mode” (p.204) for details.

Setting the Shake Reduction

By using this function, you can correct camera shake during shooting. You can select the optical correction only (Sensor Shift) or both the optical and electronic corrections (Dual). The default setting is [Sensor Shift].

Sensor Shift	Corrects camera shake optically only.
Dual	Corrects camera shake both optically and electronically.
Off	Does not apply optical or electronic correction.

1 Use the four-way controller (23) to select [Shake Reduction] in the [A Rec. Mode] menu.

2 Press the four-way controller (5).

A pull-down menu appears.

3 Use the four-way controller (23) to change the setting. 4 Press the 4 button.

The setting is saved.

3 TakingPictures

97