Pentax 8542, 8572, 8557, 8587 Copying Images, Use the four-way controller 2 to select, 161

• When a title picture is added to the beginning of a movie: When the movie is played back, the added still picture is played back for three seconds, and then the movie is played back. The added still picture is used as the thumbnail of the movie.

When a title picture is added to the end of a movie: When the movie is played back, the movie is played back, and then the added still picture is played back for three seconds. The thumbnail of the movie is not changed by adding a title picture to the end of the movie.

•Only a still picture with the same aspect ratio as the movie can be set as a title picture.

Copying Images

You can copy images from the built-in memory to the SD Memory Card and vice versa. This function can only be selected when an SD Memory Card is inserted in the camera.

Make sure that the camera is turned off before inserting or removing the SD Memory Card.

1 Use the four-way controller (2345) to select p (Image

Copy) from the Playback Mode Palette.

2 Press the 4 button.

The copying method selection screen appears.

To Copy Files from the Built-in Memory to the SD Memory Card

All the images in the built-in memory are copied to the SD Memory Card at once. Before copying the images, make sure that there is enough space on the SD Memory Card.

3 Use the four-way controller (2) to select [2}{].

SD

SD

Cancel

OK OK

4 Press the 4 button.

All the images are copied to the SD Memory Card.

5 Editingand

Printing

161