Pentax 8542, 8572 Setting the Eye-Fi Communication, Adjusting the Brightness of the Display, 181

Setting the Eye-Fi Communication

You can automatically transfer images to a computer or other devices via a wireless LAN using a commercially available Eye-Fi card. For details on transferring images, refer to “Transferring Images Using an Eye-Fi Card” (p.202). The default setting is P (Off).

1
	Use the four-way controller (23) to select [Eye-Fi] in the
2	[W Setting] menu.
	Use the four-way controller (45) to select O (On) or P (Off).
	O (On)	Turns on communication using an Eye-Fi card
3	P (Off)	Turns off communication using an Eye-Fi card
	Press the 4 button.

The setting is saved.

To establish an Eye-Fi communication, you first have to specify a wireless LAN access point and transfer destination on the Eye-Fi card. For details on how to set up the card, refer to the operating manual supplied with the Eye- Fi card.

Adjusting the Brightness of the Display

You can adjust the brightness of the display to 7 levels.

1 Use the four-way controller (23) to select [Brightness Level] in the [W Setting] menu.

2 Use the four-way controller (45) to adjust the brightness.

FDark

GNormal

HBright

6 Settings

181