Push the card in all the way. Images may not be recorded correctly if the card is not inserted all the way.
To remove the SD Memory Card, push it in once and then pull it out.
4 Close the battery cover, and slide the release latch in the opposite direction indicated by 2.
5 Slide the battery cover lock in the opposite direction indicated by 1.
Make sure that the lever clicks and the cover is locked.
If the battery cover is not locked securely, water, sand, or dirt may get into the camera.
Slide the release latch as indicated by 2, and open the battery cover towards 3.
Slide the battery cover lock as indicated by 1, and release the lock.
1
2
3 Insert an SD Memory Card into the SD Memory Card socket so that the label is facing toward the front of the camera (the side with the lens).

1

 

 

 

Getting

 

 

 

Started

Battery cover

SD Memory

SD Memory Card

 

Card socket

 

 

 

 

• The image file size varies depending on the number of recorded pixels and the number of images that can be saved on an SD Memory Card also varies.

• Set the number of recorded pixels for still pictures from the [ARec. Mode] menu and for movies from the [C Movie] menu.

• For an approximate number of still pictures and amount of time of movies that can be saved on an SD Memory Card, see “Main Specifications” (p.219).

40

Page 41 Page 43
Page 42
Image 42
Pentax 8587, 8572, 8557, 8542 specifications Getting Started, Battery cover SD Memory SD Memory Card Card socket
Page 41 Page 43
Top Page Image Contents