Pentax 8542, 8572, 8557, 8587 specifications Message, 209

Message	Description
	Displayed when you try to switch to Q mode while an
Data being recorded	image is still being recorded, or when the protect setting or
	DPOF setting is being changed. It disappears after the
	image is recorded or the setting is changed.
	Displayed when the camera takes more than five seconds
Data being processed	to display an image due to image processing, or when the
	SD Memory Card or the built-in memory is being formatted.
Built-in memory full	Displayed if the built-in memory is full when saving a file.
No image to be	Displayed when there are no images.
processed
This image cannot be	Displayed for files that cannot be processed.
processed
	Displayed if no SD Memory Card is inserted when “Image
No card in the camera	Copy” is selected from the Playback Mode Palette and the
	OK button is pressed.
Available built-in	Displayed when there is insufficient built-in memory to
memory is insufficient to
	perform copying.
copy the images
Cannot process	Displayed when red-eye compensation processing fails.
correctly
Not enough battery	Displayed when the battery is too low during Pixel Mapping.
power remaining to	Change the battery (p.32) or use the AC adapter kit
activate Pixel Mapping	K-AC117 (optional) (p.37).
No more images can be	Displayed when you select more than the maximum
selected	number of images.
The camera will turn off	Appears when the temperature inside the camera exceeds
to prevent damage from	the highest limit.
overheating
Not enough battery	Displayed when the battery does not have enough power
power remaining to
complete the requested	for GPS positioning, recording, saving, or discarding logs.
operation

8 Appendix

209