Pentax 8557, 8572, 8587, 8542 specifications About the Power Adapter and the AC Adapter

About the Power Adapter and the AC Adapter

Warning

•Always use the power adapter or AC adapter exclusively developed for this camera, with the specified power and voltage. Using a power adapter or AC adapter not exclusive to this camera, or using the exclusive power adapter or AC adapter with an unspecified power or voltage can cause a fire, electric shock, or camera breakdown. The specified voltage is 100-240V AC.

•Do not disassemble or modify the product. This can cause a fire or electric shock.

•If the generation of smoke or strange odor from the product or other abnormality occurs, immediately discontinue its use and consult your nearest service center. Continued use can cause a fire or electric shock.

•If water should happen to get inside the product, consult your nearest service center. Continued use can cause a fire or electric shock.

•If you see a lightning flash or hear thunder during use of the power adapter or AC adapter, unplug the AC plug and discontinue use. Continued use can cause damage to the product, fire, or electric shock.

•Wipe off the AC plug if it becomes covered with dust. Accumulated dust may cause a fire.

Caution

•Do not place or drop heavy objects on or forcefully bend the USB cord or AC plug cord. Doing so may damage the cord. Should the cord be damaged, consult your nearest service center.

•Do not touch or short-circuit the terminal area of the USB cord or AC plug cord while the cord is plugged in.

•Do not handle the AC plug with wet hands. This can cause an electric shock.

•Do not subject the product to strong impacts or allow it to drop onto a hard surface. This can cause a malfunction.

•Do not use the power adapter to charge a battery other than a rechargeable lithium-ion battery D-LI92. This can cause overheating, explosion, or power adapter failure.

•To reduce the risk of hazards, use only a CSA/UL certified power supply cord set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, one end with a molded-on male attachment plug cap (with a specified NEMA configuration), and the other is provided with a molded-on female connector body (with a specified IEC nonindustrial type configuration) or the equivalent.

3