Pentax 8572, 8557, 8587, 8542 specifications To set the interval, then press Button, 118

3 TakingPictures

Combining Pictures Taken at a Set Interval into a Movie (Interval Movie)

In this mode, you can record multiple still pictures taken automatically at a set interval from a set time, as a movie file.

Interval	Set the shooting interval to 1 minute, 5 minutes, 10 minutes, 30 minutes,
	or 1 hour.
	Set the total time, from 10 minutes to 359 hours. The total time and the time
Total Time	unit change depending on the interval set. The total time can be set in
	increments of 1 minute, 5 minutes, 10 minutes, 30 minutes, or 1 hour.
	Set the start delay, from 0 minutes to 24 hours. You can set this in 1-
Start Delay	minute increments. If the start time is set to 0 minutes, the first picture is
	taken as soon as the shutter release button is pressed.

1
	Use the four-way controller (2345) to select	(Interval
2	Movie) from the Capture Mode Palette.
	Press the 4 button.

The current Interval Movie settings appear for approximately one minute. To take pictures with the current settings, go to step 10.

3
	Press the 4 button while the current settings are displayed.
4	The Interval Movie setting screen appears. [Interval] is marked with the frame.
	Set the interval.
		Interval Shot
	1 Press the four-way controller (5).
			Interval	1min.
	A pull-down menu appears.		Total Time	0hr.	10min.
	2 Use the four-way controller (23)
			Start Delay	0hr.	0min.
	to set the interval, then press the
	4 button.	MENU

The frame returns to [Interval].

5 Press the four-way controller (3).

The frame moves to [Total Time].

118