SPMS

Page 1 of 7

Mechanical Instructions

Rear Cover Removal

1.Removeall fixation screws of the rear cover.

2.Now pull the rear cover backward to remove it.

Service Position Main Panel

There are 2 configurations. With and withoutpanel bracket. Both have a different service position:

Main panel without bracket.

1.Disconnectthe strain relief of the AC power cord.

2.Remove the main panel, by pushing the two centerclips outward [1]. At the same time pull the panelaway from the CRT [2].

3.Disconnect the degaussing coil by removing thecable from (red) connector 0201.

4.Turn the panel 90 degrees counter clockwise [3].

5.Flip the panel 90 degrees [4],with the components towards the CRT.

6.Turn the panel with the rear I/O towardsthe CRT [5].

7.Slide the metal heatsink (near the mains transformer5520) underneath the right chassis bracket, so the panel is secured [6].

7/8/2004

Page 76
Image 76
Philips 27PS60S321 manual Rear Cover Removal, Service Position Main Panel