Philips 27PS60S321 manual Af-M

Figure: Audio Menu

No alignments are necessary for the AUDIO sub menu. Use the default values.

AF-M

Default value is 300.

A2T

TV A2 Threshold

Default value is 250.

To adjust AF-M:

1.Enter SDAM:

Press the following key sequence on the remote control transmitter:

0-6-2-5-9-6-MENUDo not allow the display to time out between entries while keying the sequence.

2.Use the MENU UP/DOWN keys to highlight the AUDIO sub menu.

3.Press the MENU LEFT/RIGHT keys to enter the AUDIO sub menu.

4.Use the MENU UP/DOWN keys to select AF-M.

5.Use the MENU LEFT/RIGHT keys to adjust the value of AF-M to 300.

6.Press the MENU button to return to the top level SDAM menu.

7.To ensure the AF-M setting is saved: Turn the television set OFF by using the POWER button on the remote control transmitter or the local keyboard. Disconnect the television set from AC power for at least ten seconds. Reconnect the television set to AC power. Turn the television set ON by using the POWER button on the remote control transmitter or the local keyboard.

To adjust A2T:

1.Enter SDAM:

Press the following key sequence on the remote control transmitter:

0-6-2-5-9-6-MENUDo not allow the display to time out between entries while keying the sequence.

2.Use the MENU UP/DOWN keys to highlight the AUDIO sub menu.

3.Press the MENU LEFT/RIGHT keys to enter the AUDIO sub menu.