Philips 27PS60S321 manual Bus, User Interface

SPMS Page 25 of 32

Figure:

Introduction

The microprocessor part of the UOC, has thecomplete control and teletext on board. User menu, Service DefaultMode, Service Alignment Mode and Customer Service Mode are

generatedby the μP. Communication to other ICs is done via the I 2 C-bus.

I 2 C-Bus

The main control system, which consists ofthe microprocessor part of the UOC (7200), is

linked to the externaldevices (tuner, NVM, MSP, etc) by means of the I 2 C-bus. An internalI 2 C-bus is usedto control other signal processing functions, like video processing,sound IF, vision IF, synchronization, etc.

User Interface

The S8/T8 uses a remote control withRC5 protocol. The incoming signal is connected to pin 67 of theUOC.

The "Top Control" keyboard, connectedto UOC pin 80, can also control the set. Button

7/8/2004