How can I change the symbol of a TV channel?
1
In 'TV channel name', press C .
2Select the desired symbol position using D or C .
3Change the symbol at the symbol position with CH- B or CH+ A .
4 Select the next symbol position in the same way. 5 Keep pressing C until the cursor disappears.
Tip
How can I change the TV system of the TV channel?
In 'TV system', use D or C to select the TV system that produces the least distortion of picture and sound.
What is NICAM? |
|
NICAM is a digital sound transmission system. Using NICAM, you can |
|
transmit either 1 stereo channel or 2 separate mono channels. However, if |
|
reception is poor and the sound distorted you can turn off NICAM. |
|
In 'NICAM', select 'Off' using D or C . |
|
How can I improve the automatic process for storing channels? |
|
To change the automatic process for storing channels (fine tuning), select |
|
'Fine tuning'. | Tip |
Using D or C you can try to |
0Press OK to store the TV channel.
ATo search for other TV channels, begin again at 8.
BTo end, press
Sorting TV channels automatically (Follow TV)
When the automatic channel search function is activated, the TV channels are stored in a specific order. This may differ from the order in which the TV channels appear on your TV set.
This function changes the order of the TV channels stored in your DVD recorder to match the order on the TV set.
This only works if the DVD recorder ( EXT 1 TO
What does EasyLink do? |
|
If your TV set supports 'Easylink,..', TV channels will be stored during initial |
|
installation in the same order as they appear on the TV set. To store the TV |
|
channels in a different order, you'll need to change the order on the TV set. |
|
When you start the Follow TV function the information is transferred again | ? |
from the TV set. |
1Switch on the TV set. If required, select the programme number for the DVD recorder.
26 | Installing your DVD recorder |
|
