Virgin mode
Menu Language
English
Español
Français
Italiano
Deutsch
Press OK to continue
aMy screen is empty. |
|
|
|
|
| ||
|
|
|
|
|
|
| |
b Many TV sets are switched by the DVD recorder to the programme |
|
|
|
| |||
| number for the scart socket by way of a control signal sent through the |
|
|
|
| ||
| scart cable. |
|
|
|
|
| |
b If the TV set does not automatically switch to the scart socket programme |
|
|
|
| |||
|
|
|
| ||||
| number, manually change to the corresponding programme number on your |
|
|
| ENGLISH | ||
| TV set (see your TV's operating instructions). |
|
|
|
| ||
|
|
|
|
|
| ||
b Check that the scart cable is connected from the TV set to the | EXT 1 |
|
|
|
| ||
| TO | Problem |
|
| |||
| intended only for additional devices. |
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Then, read the paragraph on 'Initial installation' in 'Installing your DVD recorder'.
Connecting with an S
This connecting cable, also known as the SVHS cable, is used to transmit the brightness signal (Y signal) and colour signal (C signal) separately. This mini DIN socket/plug is also called a Hosiden socket/plug.
Have the following cables ready:
an aerial cable (1, supplied), a mains cable (2, supplied), an
1Remove the aerial cable plug from your TV set. Insert it into the ANTENNA IN socket at the back of the DVD recorder.
2Insert one end of the supplied aerial cable into the TV OUT socket at the back of the DVD recorder and the other end into the aerial input socket at the back of the TV set.
3Insert one end of an
Connecting the DVD recorder | 15 |
|