Philips DVDR75/001 manual How to change or delete a programmed recording Timer, NexTView Link

Timer
Timer List	VPS		Rec
Date	Prog. Start PDC	End	Mode
01	BBC1 20:15 *	21:30	M2
--	----- --:--	--:--	--
Total record time: 01:15
To change			To exit
Press ›		Press TIMER

How to change or delete a programmed recording (TIMER)

1Switch on the TV set. If required, select the programme number for the DVD recorder.

2Press TIMER on the remote control.

The programming mode selected last is marked.

3Select 'Timer List' using CH- B or CH+ A and confirm with C .

4Select the programmed recording (TIMER) you want to check, change or delete with CH- B or CH+ A .

Delete programmed recording

1Press the CLEAR button.

2Confirm with OK . 'Timer Cleared' will briefly appear on the TV screen.

'-- ---' appears rather than the displayed values

3 To end, press TIMER . Tip

5Press C .

Select the input field with D or C .

If required, change the information with CH+ A , CH- B or the number buttons 0..9 .

6Confirm with OK .

7To end, press TIMER .

8Switch off with STANDBY m .

'NexTView Link'

This DVD recorder is equipped with the 'NexTView Link' feature. If your television is also equipped with this function, you can mark TV programmes on the television for programming. These TV programmes will automatically be transmitted to a TIMER block on the DVD recorder. If you clear the marking of the TV programme on the television, the corresponding TIMER block on the DVD recorder will also be cleared.

For more information, read the instruction manual of your TV set.

66 Programming a recording (TIMER)