24
Allocating a decoder
Some TV channels send coded TV signals that can only be viewed properly with a purchased or
rented decoder. You can connect such a decoder (descrambler) to your DVD recorder. The
following function automatically activates the connecteddecoder for the TV channel you want to
watch.
How do I allocate the decoder for Easy Link?
If your TC=V set supports 'Easy Link' the decoder must be assigned to the
relevant TV channel on the TV set (see the operating instructions for your TV
set). Settings cannot then be made in this menu. ?
1Switch on the TV set. If required, select the programme number for
the DVD recorder.
2Switch on the DVD recorder using STANDBY/ONm.
3Use the CH+ Aand CH- Bbuttons or the number buttons
0..9on the remote control to select the TV channel for which you
want to use the decoder. If necessary, use the MONITOR button to
switch to the internal tuner.
4Press the SYSTEM-MENUbutton on the remote control. The menu
bar appears.
5Select 'A' symbol with Dor C.
6Select 'Installation' using CH-Bor CH+ Aand confirm with C.
7Select 'Manual search' using CH- Bor CH+ Aand confirm with
C.
Installation
Manualsearch
Channel/freq. CH
Entry/search 01
Programmenumber 01
TVchannel name BBC1
Decoder Off
TVsystem PAL-BG
NICAM On
Finetuning 0 Tostore
PressOK
8Select 'Decoder' using CH-Bor CH+ A.
9Select 'On' with Dor C.
How do I switch the decoder off again?
Use Cto select 'Off' in the 'Decoder' line on the screen (Decoder off). ?
0Confirm with OK.
ATo end, press SYSTEM-MENU.
Your decoder has now been allocated to this TV channel.
Installing your DVD recorder