PROBLEMSOLUTION

No playback on DVD recorder:

I cannot playback (Super) Video CDs

Poor playback on DVD recorder: (distorted picture/distorted sound)

No recording possible:

bThere is no recording on the disc: Change disc.

bYou inserted the wrong disc type: Your recorder can play back the following disc types: DVD Video, (Super)Video CD, DVD+R(W), Audio CD, , MP3-CD's

bYou inserted the disc the wrong way: Insert the disc with the label facing upwards

bDisc is dirty: Clean the disc

bWrong region code: The region code of the DVD and the DVD recorder must match.

bParental control is on: Read chapter 'Access control (child lock)'

bYou have selected the wrong programme number for the DVD recorder on the TV: on the TV, select the correct programme number for the DVD recorder.

bThe cable connecting the TV set and the DVD recorder has come loose: check the cable.

bIt is possible that this (Super) Video CD contains a menu and the 'PBC' is switched off. You can see this in status field 'PBC OFF'. To activate this function, proceed as follows:

1Press SYSTEM-MENUwhile the (Super) Video-CD is inserted .

2Select 'A' using D or C .

3Select line 'Features' using CH- B or CH+ A and confirm with C .

4Select 'On' in line 'PBC' using CH- B or CH+ A .

5Confirm with OK and end with SYSTEM-MENU .

bYour TV set is not properly adjusted. bDisc is dirty: Clean the disc

bSometimes the picture may be temporarily distorted. This is not a defect of your DVD recorder.

bThe TV channel you want to record is not stored or you selected the wrong programme number: Check TV channels stored.

bDisc write-protected (recording protected): Remove write-protection or change the disc. For more information, please see 'Preventing accidental erasing of discs' in chapter 'Manual Recording'.

bAn already finalised DVD+R has been inserted: Change disc.

ENGLISH

 

bYou have programmed the wrong time or date: Check time/date.

Programmed

bYou have not set the TIMER properly: Check the programmed recordings (TIMER block).

recording does not

bLocked disc inserted: Remove disc lock.

bAn already finalised DVD+R has been inserted: Change disc.

work:

b

 

 

'VPS/PDC' switched on but 'VPS/PDCtime' wrong: 'Enter 'VPS/PDCtime exactly to the minute.

 

Check the aerial.

 

 

 

The wrong TV channel

1

Enter the ShowView programming number of the TV channel you want.

was decoded (entered)

2

Confirm with OK .

after you programmed

3

Check the programme number/channel name in the 'Prog.' input field.

a recording using

4

If this does not correspond to the desired TV channel, select the input field and change the

ShowView System.

 

programme number/channel name.

5

Confirm with OK .

 

 

 

 

There is picture or sound interference on TV reception:

bSwitch to recording mode 'M1' with REC MODE during playback from the internal TV tuner ( MONITOR button). This will help achieve the best possible picture quality.

Before recording, select the recording mode as described in chapter 'Manual Recording', section 'Selecting the recording mode (quality)'.

bHave your aerial checked.

bYou will find information on how to change the TV system in 'Manual TV channel search' in 'Installing your DVD recorder'.

Before you call an engineer

79

 

Page 85
Image 85
Philips DVDR75/021, DVDR75/001 manual Before you call an engineer