27
2Switch on the DVD recorder using STANDBY/ONm.
3Press the SYSTEM-MENUbutton on the remote control. The menu
bar appears.
4Select 'A' symbol with Dor C.
5Select 'Installation' using CH-Bor CH+ Aand confirm with C.
6Select line 'Follow TV' with CH- Bor CH+ A. and confirm with
the Cbutton.
7Confirm the message on the screen with OK .'TV01' will appear in
the DVD recorder display.
TV 01 8Select programme number '1' on the TV set.
aI cannot switch my TV set to programme number '1'
bIf you have connected additional devices to the EXT 2 AUX-I/Osocket,
please disconnect these devices. Other connected devices may have
switched the TV set to the programme number of the scart socket. Problem
9Confirm with OKon the DVD recorder remote control.
'WAIT' will appear in the display. The DVD recorder compares the TV
channels on the TV set and the DVD recorder.
If the DVD recorder finds the same TV channel as on the TV set it
stores it at 'P01'.
a'NOTV' will appear in the display. The DVD recorder is not
receiving a video signal from the TV set.
bChech the connectors at both ends of the scart cable.
bCheck your TV's operating instructions to see which scart socket is used
for video signals.
bIf the problem persists, you won't be able to use this feature.
Please read 'Adding and clearing TV channels manually'. Problem
0Wait until for example 'TV 02' appears in the display.
TV 02 ASelect the next programme number on the TV set, e.g. '2'.
BConfirm with OKon the DVD recorder remote control.
Deleting sorting
You can delete incorrect TV channel sorting by pressing D.Tip
CRepeat steps 0to Buntil you have assigned all the TV channels.
ÀTo end, press SYSTEM-MENU.
ENGLISH
Installing your DVD recorder