DEUTSCH

PROBLEMSOLUTION

ENGLISH

Distorted sound coming from a connected hi amplifier

The picture is distorted or black during playback

No sound signal at the digital output

A DVD+RW disc cannot be played on certain DVD players

bThe DVD recorder is connected to the 'Phono-input' of your amplifier: This socket is provided only for record players without a preamplifier. Select a different audio input.

bThe TV system of the disc does not match that of your TV set (PAL/NTSC).

bThe recording can be made in colour only when the TV channels or the connected additional device send a colour signal. Black-and-white signals containing no color information (colour subcarriers) cannot be recorded.

bCheck whether the sound settings match the selected inputs and connected additional devices.

bIf a recording is too short, it is possible that a DVD player cannot detect it: Please observe the following 'Minimum recording times':

Recording mode 'M1': 5 minutes, 'M2': 10 minutes, 'M2x': 13 minutes, 'M3': 15 minutes, 'M4': 20

minutes, 'M6': 30 minutes

bSome DVD players cannot play back DVD+RW recordings. You can solve this problem by using a special function:

1Open the disc tray with OPEN/CLOSE J . Insert the disc but do not close the tray.

2Hold down the number button 2 on the remote control until the tray closes. The disc is modified.

3 If this fails to produce the desired result, repeat the procedure using the number button

3on the remote control.

4You can restore the disc to its original condition by pressing 1 .

Warning!

(WwnnNwWnNnnwNnWNwwnNnWNnwNwwnN) DVDR 75/001-75/021

There is a risk that you can no longer play the disc on other DVD players after this procedure.

Therefore, apply this function with particular care.

bIf it is impossible to play back a disc, you can try and repair it for new recordings using the following function. This will only prepare the disc for erasing. It will not be erased, however, until the recording has been completed.

Other disc errors

1

Clean the disc

2

Open the disc tray with OPEN/CLOSE J . Insert the disc but do not close the tray.

 

3

Hold down CLEAR on the remote control until the tray closes. The disc is prepared for

 

 

erasing.

 

4

Start recording as with an empty disc.

3139 246 12661

3092/000

80

Page 86
Image 86
Philips DVDR75/001, DVDR75/021 manual Other disc errors