CConnecting additional devices

Connecting additional devices to the second scart socket

You can connect additional devices such as decoders, satellite receivers, camcorders, etc. to the EXT 2 AUX-I/Osocket. When playback is started on this additional device the DVD recorder automatically connects the EXT 2 AUX-I/Oscart socket with the EXT 1 TO TV-I/Oscart socket. You will then see the picture from the additional device on your TV set, even if the DVD recorder is switched off.

The TV/DVD button on the remote control allows you to switch between playback through the EXT 2 AUX-I/Oscart socket and playback from the DVD recorder.

Connecting additional video recorders

You can connect a video recorder to the EXT 2 AUX-I/Osocket.

If you have an SVHS video recorder you can also use the OUT S-VIDEO (Y/C) socket and the

OUT L AUDIO R sockets.

Please note:

Most prerecorded video cassettes and DVDs are copy-protected. If you try to copy them you will see the message '￿￿￿￿ ￿￿￿￿' on the DVD recorder's display.

aWhen copying video cassettes the display on the DVD recorder

shows '￿￿ ￿￿￿￿￿￿'

b Check that the cable is plugged in firmly.

b If a recording is made from a video recorder, change the tracking on the video recorder.

b The DVD recorder may not be able to recognise the video input signal if

this signal is poor or does not comply with relevant standards.

 

aWhen I copy DVD video discs or prerecorded video cassettes the

 

picture is fuzzy and the brightness varies

 

b This happens if you try to copy DVDs or video cassettes that have been

 

copy-protected. Even though the picture on the TV is fine the recording on

 

a DVD+R(W) is faulty. This interference is unavoidable with copy-protected

Problem

DVDs or video cassettes.

18

Connecting additional devices

 

Page 24
Image 24
Philips DVDR75/001, DVDR75/021 CConnecting additional devices, Connecting additional devices to the second scart socket