Black plate (21,1)
Introduction of audioadjustments
1 PressMULTI-CONTROL to display the
mainmenu.
2 UseMULTI-CONTROL to select AUDIO.
Turnto change the menu option. Press to se-
lect.
3 TurnMULTI-CONTROL to select the
audiofunction.
TurnMULTI-CONTROL to switch between the
audiofunctions in the following order.
FADER/BALANCE(balance adjustment)—
PRESETEQUALIZER (equalizer recall)—
EQSETTING 1 (equalizer adjustment)—
EQSETTING 2 (equalizer fine adjustment)—
LOUDNESS(loudness)—SW SETTING 1 (sub-
wooferon/off setting)—SW SETTING 2 (sub-
woofersetting)—HIGH PASS FILTER (high
passfilter)—BASS BOOST (bass boost)—
SRCLV ADJUST (source level adjustment)
4 PressMULTI-CONTROL to display the
settingmode of each function.
#PushMULTI-CONTROL left to display the
functionselection menu.
#Pushand hold MULTI-CONTROL left to dis-
playthe main menu.
5 Adjustthe each function.
Notes
!Toreturn to the previous display, press
DISP/BACK/SCRL.
!Toreturn to the main menu, press and hold
DISP/BACK/SCRL.
!Toreturn to the ordinary display, press
BAND/ESC.
!Whenthe subwoofer controller setting is
PREOUT:REAR,you cannot switchto
SWSETTING 1 (subwoofer on/off setting).
(Referto page 26.)
!Youcan select the SW SETTING 2 only when
subwooferoutput is turned on in
SWSETTING 1.
!Whenselecting FM as the source, you cannot
switchto SRC LVADJUST.
!Ifyou do not operate functions within about
30seconds, the display automatically returns
tothe ordinary display.
Using balance adjustment
Youcan change the fader/balance setting so
thatit can provide the ideal listening environ-
mentin all occupied seats.
1 UseMULTI-CONTROL to select
FADER/BALANCEin the audio function
menu.
2 PressMULTI-CONTROL to display the
settingmode.
3 PressMULTI-CONTROL to select the seg-
mentyou wish to set.
PressMULTI-CONTROL repeatedly to switch
betweenfader and balance.
4 TurnMULTI-CONTROL to adjust speaker
balance.
Front/rearspeaker balance can be adjusted
betweenFAD F15 and FAD R15.
Left/rightspeaker balance can be adjusted be-
tweenBAL L15 and BAL R15.
#Youcan also perform the same operations by
pushingMULTI-CONTROL up or down.
#FAD0 is the proper settingwhen only two
speakersare used.
#Whenthe rear output setting is
REARSP :SUB W,adjusting the front/rear speak-
erbalance is not effective. Refer to Setting the
rearoutput and subwoofer controller on page
26.
Using the equalizer
Theequalizer lets you adjust the equalization
tomatch the car ’s interior acoustic character-
isticsas desired.
<YRD5269-A
/
S>21
Audio Adjustments
En 21
English
Section
03