Pioneer DEH-3100UB Adjusting loudness, Using subwoofer output, Adjusting subwoofer settings

	Black plate (23,1)
	Section
Audio Adjustments	03

Q factor	3 Turn MULTI-CONTROL to select the de-
2W—1W—1N—2N	sired setting.
# You can also perform the same operations by	NORMAL (normal phase)—REV (reverse
pushing MULTI-CONTROL up or down.	phase)—OFF (subwoofer off)
	# You can also perform the same operations by
	pushing MULTI-CONTROL up or down.

English

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.

1Use MULTI-CONTROL to select LOUDNESS in the audio function menu.

2Press MULTI-CONTROL to display the setting mode.

3Use MULTI-CONTROL to select the de- sired setting.

Turn to change the setting.

LOW (low)—MID (mid)—HIGH (high)—OFF

(off)

# You can also perform the same operations by pushing MULTI-CONTROL up or down.

4Press MULTI-CONTROL to determine

the selection.

# Even if the menu has been cancelled before determination, operation is settled.

Using subwoofer output

This unit is equipped with a subwoofer output which can be turned on or off.

Also, phase can be selected between normal and reverse.

1Press SW/BASS to display the subwoo- fer setting mode.

Press SW/BASS repeatedly to switch between the subwoofer setting modes in the following order.

SW SETTING 1 (subwoofer on/off setting) set- ting mode—SW SETTING 2 (subwoofer set- ting) setting mode

2Select SW SETTING 1 setting mode.

4Press MULTI-CONTROL to determine

the selection.

# Even if the menu has been cancelled before determination, operation is settled.

Note

You can also switch to this setting mode in the menu that appears by using MULTI-CONTROL.

Adjusting subwoofer settings

When the subwoofer output is on, you can ad- just the cut-off frequency and the output level of the subwoofer.

!When the subwoofer output is on, you can select SW SETTING 2.

1Press SW/BASS to display the subwoo- fer setting mode.

Press SW/BASS repeatedly to switch between the subwoofer setting modes in the following order.

SW SETTING 1 (subwoofer on/off setting) set- ting mode—SW SETTING 2 (subwoofer set- ting) setting mode

2Select SW SETTING 2 setting mode.

3Press MULTI-CONTROL to select the seg- ment you wish to set.

Press MULTI-CONTROL repeatedly to switch the segment in the following order:

Cut off frequency—Level

4Turn MULTI-CONTROL to adjust the se- lected segement.

Cut off frequency

50HZ—63HZ—80HZ—100HZ—125HZ Level

+6 to –24 is displayed as the level is increased or decreased.

En 23

<YRD5269-A/S>23