Pioneer VSX-LX51 manual Connecting analog audio sources, About the WMA9 Pro decoder

Connecting your equipment 03

1Connect a coaxial-type1digital audio output on your digital component to the COAXIAL IN 2 (CD) input.

Use a coaxial cable for the connection.

2For recording equipment, connect the optical-type DIGITAL output to a digital input on the recorder. Use an optical cable to connect to the OPTICAL OUT.2

About the WMA9 Pro decoder

This receiver has an on-board Windows Media™ Audio 9

Professional3 (WMA9 Pro) decoder, so it is possible to playback WMA9 Pro-encoded audio using a coaxial or optical digital connection when connected to a WMA9 Pro-compatible player. However, the connected PC, DVD player, set-top box, etc. must be able to output WMA9 Pro format audio signals through a coaxial or optical digital output.

Connecting analog audio sources

This receiver features two stereo audio-only inputs. One of these inputs (CD-R) has corresponding outputs for use with audio recorders.

MONITOR

COMPONENT VIDEO

MONITOR

ANTENNA

OUT

IN

OUT

IN

OUT

OUT

IN 1

IN 2

IN 3

OUT

Y

PB

FM UNBAL 75

AM LOOP

DVR1

DVR2

ZONE 2

PR

ASSIGNABLE

1 - 3

OUT

IN

OUT

IN

OUT

IN

OUT

IN

FRONT

CENTER

(Single) PRE OUT

CD-R

SUBWOOFER SURROUND SURROUND BACK

I CH IN

SPEAKERS

FRONT

L

CENTER

R

SURROUND

L

SURROUND BACK / B

A

R

R

L

(Single)

SURROUND SURROUND BACK

SELECTABLE SEE INSTRUCTION MANUAL

SELECTABLE VOIR LE MODE D'EMPLOI

VSX-LX51

OUT

PLAY

IN

REC

R

L

AUDIO IN/OUT

•Connect the analog audio outputs of the source component to one of the AUDIO inputs.

Connect using a stereo RCA/phono jack audio cable.

•If you’re connecting a tape deck, MD recorder, etc., connect the analog audio outputs (OUT) to the analog audio inputs on the recorder.

Connecting a component to the front panel inputs

The front panel inputs comprise a composite video jack (VIDEO), stereo analog audio inputs (AUDIO L/R) and an optical digital audio input (DIGITAL IN). You can use these connections for any kind of audio/video component, but they are especially convenient for portable equipment such as camcorders, video games and portable audio/video equipment.

•Push down on the PUSH OPEN tab to access the front video connections.

	VIDEO INPUT		iPod DIRECT	MCACC
VIDEO	L AUDIO R	DIGITAL IN	USB	SETUP MIC

PUSH

OPEN

	AUTO SURR/	HOME	STANDARD	ADVANCED	STEREO/
	STREAM DIRECT	THX	SURROUND	SURROUND	A.L.C.	VIDEO INPUT		iPod DIRECT	MCACC
					VIDEO	L AUDIO R	DIGITAL IN	USB	SETUP MIC
PHONES	MULTI-ZONE			ST –	ST +
	CONTROL	ON/OFF	SPEAKERS

VIDEO OUTPUT DIGITAL OUT

TV game, video camera, etc.

•Select these inputs by pressing VIDEO or using INPUT SELECT (remote) to select VIDEO.

Tape deck, etc.

Note

1• If your digital component only has an optical digital output, you can connect it to one of the optical inputs on this receiver using an optical cable. When you set up the receiver you’ll need to tell the receiver which input you connected the component to (see also The Input Setup menu on page 65).

•The digital outputs from other components can be connected to any spare digital audio inputs on this receiver. You can assign them when setting up the receiver (see also The Input Setup menu on page 65).

2In order to record some digital sources, you must make analog connections as explained in Connecting analog audio sources below.

3• Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

•With WMA9 Pro, sound problems may occur depending on your computer system. Note that WMA9 Pro 96 kHz sources will be downsampled to 48 kHz.

19

En