Other connections | 08 |
•Use a
VIDEO | Pioneer flat screen TV | VIDEO | |
INPUT 1 | INPUT 2 | ||
| |||
DVD player | Satellite receiver, etc. | ||
DVD |
| TV SAT | |
AUDIO IN |
| AUDIO IN | |
To make the most of the SR+ features, you should connect your source components (DVD player, etc.) in a slightly different way to that described in this chapter. For each component, connect the video output directly to the flat screen TV, and just connect the audio (analog and/or digital) to this receiver.
Using the SR+ mode with a Pioneer flat screen TV
When connected using an SR+ cable, a number of features become available to make using this receiver with your Pioneer flat screen TV even easier. These features include:
•
•
•
•Automatic video input switching on the flat screen TV.
•Automatic volume muting on the flat screen TV.
See also SR+ Setup for Pioneer flat screen TVs on page 68 for more on setting up the receiver.
Important
•The SR+ features do not work when the iPod USB function is selected.
1 | 2 | DTV/TV | EON | MPX SIGNAL SEL |
3 |
|
| ||
GENRE | MCACC | SLEEP | DISPLAY | CH |
4 | 5 | AUDIO | ||
6 |
|
| ||
SR+ | SBch | A.ATT |
| RECEIVER |
7 | 8 | TV CTRL |
| |
9 |
|
| ||
D.ACCESS | CH LEVEL | CLASS |
|
|
| 0 | ENTER |
|
|
| INPUT | MASTER | MAIN | ZONE 2 |
| VOLUME |
1Make sure that the flat screen TV and this receiver are switched on and that they are connected with the SR+ cable.
See Using this receiver with a Pioneer flat screen TV on page 60 for more on connecting these components.
•Make sure you have also selected the display input to which you’ve connected the receiver in The Input Setup menu on page 65.
2To switch SR+ mode on/off, press RECEIVER, then press the SR+ button.
The front panel display shows SR+ ON or SR+ OFF.
•The automatic video input switching and the automatic volume muting features are enabled separately; see SR+ Setup for Pioneer flat screen TVs on page 68.
61
En
