Other Settings
Multi Channel Input Setup
You can adjust the level of the subwoofer for a multi- channel input.
1Select ‘Multi Ch In Setup’ from the Other Setup menu.
7.Other Setup
a . Multi Ch In Setup
b . ZONE Audio Setup
c . SR+ Setup
d . HDMI Control Setup
e . OSD Adjustment
:Return
2Select the ‘SW Input Gain’ setting you want.
•0dB – Outputs sound of the subwoofer at the level originally recorded on the source.
•+10dB – Outputs sound of the subwoofer at the level increased by 10 dB.
7a.Multi Ch In Setup
SW Input Gain | 0dB |
Video Input | [ BD ] |
:Finish
3When you’re finished, press RETURN. You will return to the Other Setup menu.
10
ZONE Audio Setup
If you’ve made
1Select ‘ZONE Audio Setup’ from the Other Setup menu.
7.Other Setup |
|
|
| 7b.ZONE | Audio | Setup | |||||
|
|
|
|
|
| ZONE | 2 Volume Level | ||||
| a . Multi | Ch In | Setup |
|
|
| Variable |
| |||
| b . ZONE Audio Setup |
|
|
|
|
|
|
|
| ||
| c . SR+ | Setup |
|
|
|
|
|
|
|
|
|
| d . HDMI Control Setup |
|
|
|
|
| |||||
| e . OSD | Adjustment |
|
|
|
|
| ||||
|
|
|
|
|
| Be | careful of | loud | |||
|
|
|
|
|
| volume | when | "Fixed" | |||
|
|
|
|
|
| is | selected. |
|
|
| |
|
|
| :Return |
|
|
| :Finish | ||||
2Select the volume level setting.1
•Variable – Use this setting if you’ve connected a power amplifier in the sub room (this receiver is simply being used as a
•Fixed – Use this setting if you’ve connected a fully integrated amplifier (such as another Pioneer VSX receiver) in the sub room and want to use that receiver’s volume controls. (This setting is not available if the surround back system setting is set to ZONE 2.)
With the Fixed setting, the source is sent from this receiver at maximum volume, so make sure the volume is quite low in the sub zone at first, and then experiment to find the correct level.
3When you’re finished, press RETURN. You will return to the Other Setup menu.
Note
1 If you selected ZONE 2 in the Surround back speaker setting on page 41, you won’t be able to change the volume level.
67
En
