Pioneer VSX-LX51 manual Hdmi, 13Additional information, Symptom, Remedy

13Additional information

HDMI

Symptom	Remedy
The HDMI indicator blinks	• Check all the points below.
continuously.
No picture or sound.	• This receiver is HDCP-compatible. Check that the components you are connecting are also HDCP-
	compatible. If they are not, please connect them using the component, S-Video or composite video
	jacks.
	• Depending on the connected source component, it’s possible that it will not work with this receiver
	(even if it is HDCP-compatible). In this case, connect using the component, S-Video or composite
	video jacks between source and receiver.
	• If the problem still persists when connecting your HDMI component directly to your monitor,
	please consult the component or monitor manual or contact the manufacturer for support.
	• If video images do not appear on your TV or flat screen TV, try adjusting the resolution, DeepColor
	or other setting for your component.
	• If ‘NOT SUPPORT’ appears in the receiver’s display, try adjusting the resolution, DeepColor or
	other setting for your component.
	• While analog video signals are being output over HDMI, use a separate connection for audio
	output.
	• When this receiver reproduces MULTI CH IN audio sources with the HDMI setting set to
	THROUGH, you cannot hear audio output from all channels. In this case, make a digital or analog
	audio connection.
	• To output signals in DeepColor, use an HDMI cable (high speed HDMI cable) to connect this
	receiver to a component or TV with the DeepColor feature.
No picture.	• Try changing the Resolution setting (in Setting the Video options on page 70).
No sound, or sound suddenly	• Check that the HDMI AV setting is set to AMP/THROUGH.
ceases.	• If the component is a DVI device, use a separate connection for the audio.
	• If analog video is being output over HDMI, please use a separate connection for the audio.
	• Check the audio output settings of the source component.
Noisy or distorted picture.	• Sometimes a video deck may output a noisy video signal (during scanning, for example), or the
	video quality may just be poor (with some video game units, for example). The picture quality may
	also depend on the settings, etc. of your display device. Switch off the video converter and reconnect
	the source and display device using the same type of connection (component, S-Video or
	composite), then start playback again.
	• If the problem still persists when connecting your HDMI component directly to your monitor,
	please consult the component or monitor manual or contact the manufacturer for support.
HDCP ERROR shows in the	• Check whether or not the connected component is compatible with HDCP. If it is not compatible
display.	with HDCP, reconnect the source device using a different type of connection (component, S-Video
	or composite). Some components that are compatible with HDCP still cause this message to be
	displayed, but so long as there is no problem with displaying video, this is not a malfunction.

Note

•If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to return to normal operating conditions.

84

En