Pioneer VSX-LX51 manual Controls and displays, Operating range of remote control unit

Controls and displays 04

10 MCACC SETUP MIC jack

Use to connect the supplied microphone.

11 PHONES jack

Use to connect headphones. When the headphones are connected, there is no sound output from the speakers.

12Listening mode buttons

AUTO SURR/STREAM DIRECT – Switches between Auto surround mode (Auto playback on page 29) and Stream Direct playback. Stream Direct playback bypasses the bass/treble controls for the most accurate reproduction of a source (page 32).

HOME THX – Press to select a Home THX listening mode (page 30).

STANDARD SURROUND – Press for Standard decoding and to switch between the various 2 Pro Logic IIx and Neo:6 options (page 29).

ADVANCED SURROUND – Use to switch between the various surround modes (page 30).

STEREO/A.L.C. – Switches between stereo playback, Auto level control stereo mode and Front Stage Surround Advance modes (page 31).

13MULTI-ZONE controls

If you’ve made MULTI-ZONE connections (see MULTI- ZONE listening on page 57), use these controls to control the sub zone from the main zone (see Using the MULTI- ZONE controls on page 58).

14 SPEAKERS

Use to change the speaker system (page 55).

15 ST +/–

Use to select preset radio stations (page 35).

Operating range of remote control unit

The remote control may not work properly if:

•There are obstacles between the remote control and the receiver’s remote sensor.

•Direct sunlight or fluorescent light is shining onto the remote sensor.

•The receiver is located near a device that is emitting infrared rays.

•The receiver is operated simultaneously with another infrared remote control unit.

30° 30°

7 m

25

En