Pitney Bowes K700 manual Adding Postage/Connecting to Data Centre

5 • Adding Postage/Connecting to Data Centre

Connecting Your Postage Meter to Analog Phone Line

Your postage meter must be con-
nected to an analog phone line to dial
in to the Pitney Bowes Data Centre
for any reason (add postage, check
the balance in your Pitney Bowes
Postage By Phone® account, etc.).
Plug the telephone line (supplied) into
the connector on the back of the
postage meter (see figure at right).
Remember to use a dedicated analog
phone line (your home phone is con-
nected to one).	Plug phone line in here

IMPORTANT

•For printing postage, the postage meter does not have to be connected to a phone line. However, if you add funds frequently, we recommended you keep the meter connected to an analog phone line.

•If you are using a DSL line you should use a DSL filter ob- tained from your DSL provider.

5-2 SV61503 Rev. A