30
MEASURE
EXERCISE TIME IN ZONE OWNCAL
FUNCTIONS DURINGHEART RATE MEASUREMENT

SEE YOUR HEART RATE

You can see your heart rate in beats per minute. A flashing
heart symbol indicates an ongoing heart rate
measurement. The heart symbol flashes at the pace of your
heart.
If there is - - reading on the display, there has not
been heart rate reception for at least 5 minutes.
Bring the wrist receiver up to your chest near the
transmitter’s Polar logo. The receiver starts looking
for the heart rate again.

ILLUMINATE THE DISPLAY

Press .
Backlight is activated for a few seconds.

TURN THE SOUND SIGNAL AND

THE BUTTON SOUND ON/OFF

When appears in the display, you will hear an alarm
sound with each heart beat if you go above the upper limit
or below the lower limit of your Target Zone. You will hear
a beep when pressing the buttons. The sound signal will be
on in OwnZone determination.