Polar S725X user manual Setting tips, Measuring mode

Setting tips

Swap time 1 or time 2

In the Time of day display press and hold the down button. Time 1 or

Time 2 is displayed in the uppermost row for a couple of seconds. Displayed time will now be used in all watch and alarm functions. If you chose time 2, “2” is displayed in the Time of day display.

Shortcut to watch settings

C. EXERCISE

Time of Day

Measuring

Mode

Recording

Mode

You can use two modes in your exercise: Measuring or Recording mode. In the Measuring mode you can see your heart rate but your exercise is not recorded. In the Recording mode your exercise is recorded and stopwatch and other calculations are started.

Press and hold the signal/light button for a couple of seconds to enter to watch setting loop. Scroll up or down button until the desired watch function is displayed. Set the function as in the “Watch settings” section.

Swap measuring units

•as you set your user information on weight and height.

•as you set an Interval Training Set on distance-based interval or recovery.

•as you set the altitude reference point.

Press and hold the signal/light button until the units are swapped. Release the button.

Swap date, user ID number, user name and logo

You are able to set a user ID number, user name and logo by Polar Precision Performance software. These settings are shown on the upper row of the Time of day display. You can swap between the user ID, user name, logo and date by pressing and holding the up button.

Measuring mode

1.Wear the transmitter and the wrist unit as described in “Easy start” section.

2.To make sure that the code search will be successful:

•Keep the wrist unit within 1 meter/ 3 feet of your transmitter.

•Check that you are not near other people that have heart rate monitors, high voltage power lines, televisions or other sources of electromagnetic disturbance. In some cases, mobile phones may cause interference when

starting the heart rate measurement.

3.Start from the Time of day display by pressing the OK to start measuring your heart rate. A heart symbol will start flashing and your heart rate in beats per minute will appear in max. 15 seconds. The wrist unit returns automatically to the Time of day display within 5 minutes if there is no heart rate reception.

50 51