Polar S725X user manual Exercise set in use Use E1-E5

The following displays start to alternate, if you have no speed or altitude settings in use, as you enter the Measuring mode:

Exercise name Memory left Speed OFF Altitude OFF

Time of day

Current heart rate

BasicUse (E0)/ Recording rate No speed settings in use

Exercise set in use (E1-E5)

If you are running or cycling, turn the speed settings on by pressing and holding the down button. Repeat until the right speed setting is displayed in the right-hand corner of the display.

--= speed settings off ru = running speed b1 = bike 1

b2 = bike 2

Make sure that you have the right speed settings turned on before starting the recording.

The following displays start to alternate, if you have running speed and altitude settings on, as you enter the Measuring mode.

Exercise name Memory left Speed type Altitude

Time of day

Current heart rate

BasicUse (E0)/	Recording rate	Running speed
Exercise set in use		in use
(E1-E5)

If you are not running, turn the speed settings off by pressing and holding the down button. Repeat until -- appears. This will give you more memory capacity.

If you want to record running information, turn the foot pod on after your heart rate is displayed on the wrist unit. Press OK to start recording your exercise.

Or

If you want to record running information without heart rate measurement: after the heart rate reading 00 appears turn the foot pod on.

52 53