![](/images/new-backgrounds/1236913/23691365x1.webp)
Upgrading Polycom CX700 Phone within a Microsoft Office Communications Server 2007 R2 Environment
Do one of the following:
•Upload certificate chain
If for some reason the cACertificate attribute is not populated, or you want to make sure that it contains the information you want, you can run certutil with the
On a domain controller, open cmd.exe and run the following command:
certutil
For example:
certutil
•Enable Auto Enrollment
As an alternative to running certutil and uploading the Trusted Root Certificate Chain into Active Directory, you can enable the domain for certificate auto enrollment. For instructions, refer to Enabling Automatic Certificate Enrollment on page
Step 1.4 - Configure Microsoft Office Communications Server
Modify client version filter
On the Pool running the Device Update service, confirm that Client Version control is either turned off or the filter is set to a value that will allow OCPhone (Polycom CX700 phone) devices that are version 1.0.199.* or higher as shown in the figure below. There is also a client version filter on the Edge so if you plan to upgrade external Polycom CX700 phones as well, be sure to make the same adjustment on your Edge server (set to 1.0.522.* by default).
27