Troubleshooting the Polycom CX700 Phone

How to Configure DHCP Option 119

To configure DHCP Option 119:

1.From DHCP Administrator, right click DHCP server name and select Set Predefined Options.

2.Leave Option class: as DHCP Standard Options and click Add.

3.For Name:, enter DNS Search List, set Code: to 119 and Data Type to String, leave the Array check box unchecked (it is not an array) and click OK.

4.Right click Scope Options, select Configure Options, check Option 119 DNS Search List.

5.In the Value section in the String list box, enter a list of domain suffixes in your organization delimited by a semi-colon.

For example, contoso.com;corp.contoso.com;fabrikam.com

6.Click OK to close the Predefined Options and Values page.

Configuring Windows Server as an NTP Time Source

For Windows 2008

To configure Windows 2008 Server as an NTP time source:

1.Click Start, Run, type regedit in the list box and click OK to open the Registry editor.

2.To enable the Network Time Protocol; NTPserver, locate and click

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time \TimeProviders\NtpServer\

3.In the right pane, right-click Enabled, then click Modify.

4.In the Edit DWord Value box, type 1 under Value data, then click OK.

5.Now go back and click on

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time \Parameters\NtpServer

43

Page 49
Image 49
Polycom 1725-31424-001 manual Configuring Windows Server as an NTP Time Source