Chapter 4 - Setting Up Conferences
4-50
SilenceIT Select this check box to enable automatic noisy line
muting for Audio Only participants taking part in a
video conference. When a noisy participant line is
muted, a message is played to inform the other
participants that one of them was muted due to their
noisy line. SilenceIT must be enabled in the IVR
Service to be enabled for new conferences. If you
enable this option while an IVR Service you assigned
to the conference is not SilenceIT-enabled, the
conference definition will be rejected.
See the MGC Manager User’s Guide, Volume II,
Chapter 2, “Using SilenceIT”.
VTX 1000 Select this check box to create a VTX enabled
conference.
Undefined participants connecting directly to VTX
1000 enabled conferences are initially assigned wide
band resources. If the endpoint is not identified as
VTX, the wide band resources are subsequently
released. All pre-defined participants in VTX enabled
conferences are allocated wide-band resources.
Audio Alg Select the preferred audio algorithm for the type of
conference you define. This parameter represents the
compression ratio. The higher the ratio, the more
processing resources are required.
The available audio algorithms are:
•Auto
• 8 (G.729/G.723.1)
•16 (Siren7/G.728)
•24 (Siren14/G.722.1/Siren7)
•32 (Siren14/G.722.1/Siren7)
•48 (Siren14/G.722/G.711)
•56 (G.722/G.711)
•56 (G.711)
Table 4-5: Conference Properties - Settings Parameters (Continued)
Option/Field Description