Chapter 4 - Setting Up Conferences
4-110
Video Protocol Select the video compression standard:
•Auto - Select this option to use the conference’s Video
Protocol settings and to enable the dynamic
adjustment of the Video Protocol. For more details, see
“Defining Advanced Media Settings” on page 4-57.
•H261 - the video compression standard mandatory to
all endpoints.
•H263 - a compression standard that provides improved
video quality. This standard is not supported by all
endpoints.
•H264 - a video compression standard that improves
video quality at a line rate lower than 384 Kbps.
•H264* - a Polycom proprietary standard for video
compression that improves video quality at a line rate
lower than 384 Kbps.
Note:
—When video protocol is set to Auto in the
Conference Properties – Settings, this overrides
the Video Protocol settings in the Participant
Properties – Advanced dialog box as the dynamic
mode is enabled and the video settings are forced
by the MCU.
—When Video Protocol is set to H.263 or H.264 and
the endpoint does not support it, the participant is
connected as Secondary (Audio only).
—During an On Going ISDN/ATM/MPI conference,
this setting may be disabled.
Recording Designate the participant as an audio recording port
connected to an external recording device:
Select one of the following:
•None – The participant is not connected to an external
recording device.
•Dial up – The participant is used as the recording port
to an external device.
For more details, see the MGC Manager User’s Guide
VoicePlus Edition, Chapter 8, “Recording and Playback
Using Prairie Systems”.
Table 4-16: ISDN/ATM/MPI/T1-CAS Participant - Advanced (Continued)
Field/Option Description