Polycom DOC2560A manual Camera Control, To control a far camera, 3-98

Chapter 3-Basic Operation

Camera Control

This function is not available to chairpersons using PCM with ISDN endpoints.

The endpoint to be controlled must support Far End Camera Control (FECC).

Using the arrow keys of the remote control device, the chairperson can control the direction, zoom and focus of a remote endpoint’s camera.

To control a far camera:

1Use the Up/Down arrow keys to select Camera Control in the Main Menu and then press the Right arrow or # key to confirm your selection.

or

Press the 4 key on the Remote Device.

The Camera Control sub menu is displayed.

2Use the Up/Down/Left/Right arrow keys to select the far camera to be controlled.

A colored frame is displayed around the selected cell in the video layout.

3Use the Zoom In key to activate FECC.

3-98